How to quickly starch a hat with your own hands at home
Over time, hats, like other clothes, lose their original shape. Due to this, the helmet loses its luster and grace. Starch corrects this problem. After this procedure, the headdress regains its original appearance. At home, various methods are used to solve the question of how to starve the hat yourself. And for this, a microwave is sometimes used.
Content
Why is it necessary?
Starching hats has the following effects:
- the shape of the headdress is restored;
- the elasticity and density of the threads increase;
- the product does not crease;
- a protective layer is created on the surface of the fabric;
- the life of the hats is increased.
This procedure can be applied to straw and other types of hats. The effect will be the same in each case.
The main drawback of this procedure is that to achieve the desired result, the given recipes must be followed exactly.
And often similar problems arise with crocheted hats.
Solution Recipes
Despite the fact that the name of the procedure comes from the word "starch", you can restore the original appearance of the headdress using other means. The algorithm may differ in each case.Basically, to get the required result, you need:
- prepare a solution;
- soak the hat in the solution for a few minutes;
- take out and dry the hat, occasionally sprinkling it with water.
This procedure is complicated by the fact that after starching the fabric becomes stiffer. Therefore, before starting the operation, the hat should be pulled over an object that repeats the shape of the head.
Classic
According to the classic recipe, to give the hat the desired shape, you will need:
- Put a liter of water in the container and add a tablespoon of starch (potato, rice or wheat is fine).
- Put the container with the starch on the fire and bring to a boil.
- Remove the container from the stove and cool the solution.
After that, you need to put a hat in the mixture for 10 minutes. This recipe is mainly used to starch knitted hats or Panama hats (soft fabric products).
PVA glue
This method is not popular, but it gives a persistent and long-lasting effect. To achieve the desired result, you need to mix water and PVA glue in equal proportions. If the harness is small, the product is completely placed in the solution for a few minutes. Wide and knitted hats are recommended to be wiped on both sides with a brush dipped in the specified mixture. Diluted glue does not damage the fabric, because it is absorbed only by the upper layers.
With gelatin
Gelatin is used to starch knitted hats or Panama hats. Also, this recipe is suitable for processing hats with wide brims. The starching is carried out according to the following algorithm:
- A tablespoon of gelatin is diluted in a glass of water.
- The mixture is left for one hour.During this time, the gelatin has time to swell.
- The composition is placed on the stove and heated. It is important to ensure that the solution does not boil.
- The cap is placed in the solution for as long as necessary to cool the gelatin.
The solution with gelatin provides hard starch, thanks to which the headgear retains its shape for a long time.
sugar solution
This recipe is recommended for use in cases when it becomes necessary to give knitted products a certain shape. To get this result, you need:
- Mix 15 teaspoons of sugar and a liter of water.
- Bring the mixture to a boil.
- Add 2 teaspoons of potato starch to the composition.
- Soak the hat in the solution for 15 minutes.
Thanks to the sugar solution, the cap does not turn yellow over time and retains its shape longer. In addition, thanks to this mixture, a layer is created on the surface of the product that protects it from moisture.
Silicate glue
Silicate glue is used for cases where a long-term starch effect is required. To do this, you need to mix one teaspoon of this product with 125 milliliters of heated water. The resulting solution is then applied evenly with a brush to the surface of the hat. At the end of the procedure, the cap is hung up to dry.
Starch degrees
The period of time during which the cap retains its shape depends on the concentration of the initial substance (mainly starch). Understanding this effect helps you get the most accurate result.
moo
To achieve the desired effect, you will need:
- Mix a glass of water and a teaspoon of starch.
- Pour 900 ml of water into a saucepan and bring to the boil.
- Slowly pour the starch solution into a saucepan, stirring constantly.
- After cooling, place the hat in the solution for 10 minutes.
At the end of the procedure, the product should be pulled over a three-liter jar or another product that conforms to the shape of the head. If necessary, after drying, the hat can be ironed with an iron.
Mean
You can achieve an average degree of hardness if, instead of a teaspoon, take a tablespoon of starch in a similar volume of water. Further, the procedure is carried out according to the algorithm described earlier.
High
To keep the hat in a certain shape for several days, you will need to soak the hat for 10 minutes in a high starch solution. In this case, you need to take 2 tablespoons of the substance and a similar amount of water.
How to starch well at home?
You can starch the clothes both in specialized workshops and at home. The second option does not cause particular difficulties and does not require significant labor costs.
Hot method
The essence of the hot method was described above. To starch a headdress you will need:
- Mix water and starch in determined proportions according to the required hardness.
- Heat the rest of the water on the fire, bring to a boil.
- Add a starch solution to boiling water and wait for the mixture to thicken.
- Wait until the resulting dough has cooled (five minutes is enough).
There is another method that will require:
- Mix one tablespoon of rice starch with 200ml of water.
- Bring 800 ml of milk to the boil.
- Gradually pour the starch solution into the hot milk.
- Soak the hat in the resulting composition for 20 minutes.
To make the hat shine, it is recommended to add a pinch of salt to these mixtures.
Cold method
This method is recommended for those who have not previously performed such a procedure.To give the cap the desired shape, you need to mix 1.5 tablespoons of starch and 500 milliliters of water at room temperature. The resulting solution is then applied with a brush to the product on both sides. After the procedure, the hat is left to dry.
Dry method
The dry method (also known as military) is used for knitwear. "Clean" starch should be applied to the hat, evenly covering each thread. After that, the hat should be sprinkled with water from a spray bottle. At the end of the procedure, the product must be covered with white paper to dry.
In the microwave
This original way speeds up the procedure. To achieve the desired result, you will need to mix 2 tablespoons of starch and a liter of water. The resulting solution is then poured into a container, in which the part is placed. Then the container is placed in the microwave for 5 minutes. The device must be set to full power. At the end, the hat is left to dry.
That it is impossible to starch?
Starch is not recommended for products that fit perfectly to the body. The reason for this is that the processed material does not allow air to pass through.
Due to this, the skin suffers from an acute lack of oxygen, which can lead to the development of various dermatoses.
It is also not recommended to carry out this procedure with regard to dark fabrics, since after treatment the color of the latter often changes. Also, starch does not interact with synthetics. Therefore, hats made from this material do not retain their shape.
It is not recommended to put hats with dental floss in the starch solution.The threads of the latter stick together, which is why the product loses its former appeal.To avoid such consequences, it is recommended to treat a small part of the cap with a starch or other solution before the first procedure and observe the reaction.
Tips & Tricks
If the cap is cotton, it is recommended to cover the product with white paper after the procedure. When processing wide-brimmed corks, a fine needle should be used to apply the starch solution to the corners and components. The dummy, on which the harness is put on after the procedure, must be prepared before starting the manipulations.
When working with knitted caps, you need to use mixtures that provide good hold: with gelatin or PVA glue.
In addition, it is not recommended to starch children's products. This is explained by the fact that after the procedure the hat stops letting air in, which can cause skin formations or dandruff on the head.