15 types of viscous thickeners and how to make an activator at home

Various thickeners are used to make slimes. They can be used to make a plastic toy that fights stress. Another name is hand toy. The toy is popular, so people tend to make it themselves rather than buying it ready-made from the store. There are different ways to make a slime that does not stick to the skin and at the same time stretches perfectly.

What is Slime Activator

It is the same as a thickener to help solidify a liquid substance. Looks like a liquid, gel, spray or powder. The activator participates in a chemical reaction that accompanies the mud preparation process. An activator is made up of different ingredients.

Substances to activate slime

Under their influence, the structure of the components changes, and as a result, the slime acquires the correct consistency, resembling chewing gum. Thickeners come in different shapes, the type of which depends on the base of the slime. There are options suitable for each case.

borax powder

One of the most common thickeners. It contains sodium tetraborate, around which there are a large number of spores. Often borax is based on a component such as borax. The powder has small granules, so it is easy to work with.

Saline solution

A good activator for slime, under the influence of which elastic mucus is formed. It is easier to buy, unlike other ingredients, because it is easier to find in stores. Saline solution - liquid for contact lenses, must contain borates. It can be boric acid or sodium tetraborate.

Liquid starch

The composition contains the same sodium tetraborate, which will be common for detergents. It can be found on store shelves next to household chemicals. Allows you to quickly create a slime from just three components.

Eye drops or eye drops

Another effective tool that few people know about. The main ingredient involved in making slime is boric acid.

Look at Also

What are the types of slimes, what they look like and how they differ

Vaporizers

Few people know that Teymurov's foot spray is excellent as a thickener for mud. Of course, the composition contains boric acid. It is added at the stage of mixing all components. The mass is mixed with each zilch. Thus, they monitor the evolution of the structure of the mud and if it is still necessary to add a spray. 7-10 pshiks are enough and the rubber toy is ready.

A soda

Borax isn't the only remedy you need to make hand gum. Soda powder does the job just as well. The finished toy, containing soda in the base, resembles a structure of chewing gum.

Gelatin

With the help of the substance it is possible to make slime from just two ingredients. In addition to gelatin, you will need plasticine to sculpt different figures.The gelatinous mass is added to the soft plasticine in an elastic form. To do this, the granules are filled with water and infused for 45 minutes.

When creating a toy, both components must be hot.

Sugar

Powdered sugar is used for this purpose. You can buy a ready-made mixture in a store or prepare it yourself. Sugar is crushed using a food processor or manually with a rolling pin. Mud with the addition of granulated sugar is prepared on the basis of liquid soap and mild shampoo. Add 1 teaspoon to the mixed ingredients. Granulated sugar. After thorough mixing, the mixture is placed in the freezer for half an hour.

Starch

Dry powder will not work, so a pasty mixture is made using water. The mass is mixed with water in equal proportions. The mixture should be viscous, so you won't need a lot of powder. If the slime is made on the basis of starch, it is better to choose shaving foam. A certain amount of foam is added depending on the quality of the starch. If the powder is bad, you will need to extract a full bottle.

Borax

The toy gum thickener can be replaced with Borax. Plastic slime made from this product turns out to be the most multifunctional. It lends itself to creating any shape, sticks easily to surfaces and rolls up into a ball. The substance is sold in household goods stores. You can also order online or buy from a pharmacy kiosk.

hair polish

The component is suitable if a person decides to make slime himself at home, and at the same time is inexpensive. For this, hairspray is the best solution. It is ideal to use it because it is sold in any store.

The only thing to consider when choosing is to give preference to the option with a super strong fixation.

Deodorant

Baking slime with an air freshener is risky business. The tool is capricious, since the anti-stress toy does not always take the desired shape. A person trying to make a slime for the first time, especially a beginner, makes one of the most common mistakes - using two or more thickeners at the same time. This approach will not speed up the cooking process, and in most cases you will have to start all over again. Only one thickener is used, no more.

Look at Also

10 recipes for making slime without shaving foam

Boric acid

The component will help you make the perfect stress relief toy. The recipe is simple and consists of simple ingredients. What do you need:

• 200 g of stationery glue;
• 100g of PVC glue;
• 2 tsp boric acid;
• shaving cream;
• food coloring.

Cooking process:

1. First, two adhesives and food coloring are mixed together.
2. Then the shaving foam is added. This increases the volume of the mud, at least 1.5 times.
3. The last component is boric acid for thickening.

When mixing, make sure the toy does not stick to your hands. If this happens, a little more boric acid is added. Slime is kneaded in the same way as regular dough. Food coloring is added exclusively in the first step. Thus, the mass will become the desired color or shade. The substance is used in liquid form.

Sodium tetraborate

When none of the listed thickeners have been found for various reasons, it is recommended to purchase sodium tetraborate. This solution can be purchased without a prescription as it is sold without a prescription. It is prepared on the basis of water and PVA glue.A quarter glass is filled with water and 100 g of glue is dissolved in the liquid. The water should be lukewarm. After mixing the two components, a thickener is added.

The next step is to add dyes and other small details that will change the structure and appearance of the slime. It can be multi-colored balloons and something like that. When the mixture is mixed, it is placed in a cellophane bag and kneaded well by hand.

How to thicken with your own hands

If listed thickeners are not available, another component may be used. We are talking about ordinary flour, which is a good alternative to starch. It is possible to thicken slime with this ingredient, but this will negatively affect the result. The toy will be just as elastic, but it doesn't stretch well.

Look at Also

3 recipes for making magnetic slime at home

There is a recipe for making a do-it-yourself slime activator, which will do in any case. Pour 100 ml of sodium tetraborate into a medium sized container. Shake it well. Here is the finished mix. Suitable for any slime recipe except edible options. Each time you need to add a few teaspoons of the solution. Therefore, the volume will last for a long time.

Is it possible to thicken a sludge with hydrogen peroxide

A solution used for medical purposes will do just that. Under the influence of peroxide, the slime turns out to be thick and more like a rebound. The toy is prepared from simple ingredients that everyone can find at home. A little effort and the slime will be ready, and even with a unique design. The cost of such a toy will translate into a penny. Prepare as follows:

1. In a bowl, starch is mixed with boiling water in a ratio of 1: 2. The result should be a jelly-like mixture.
2. After complete cooling, another 100 ml of PVA glue is added.
3. At the third stage, there is a dye and 5-6 drops of hydrogen peroxide.

The mass must be mixed to a uniform consistency. Hydrogen peroxide gives slime lightness and airiness. After completing the stages, the mixture rolls into a ball, which can be used for its intended purpose.

Tips & Tricks

Even when creating such a toy, safety precautions are observed. This is due to the fact that the composition contains household chemicals. A few tricks will help to "revive" the slime:

1. Loss of structure and adhesion to the hands. Over time, the slime loses its consistency. A few drops of tetraborate will solve the problem.
2. The mud is divided into parts. In this case, the mixture must be hardened. The ideal option is to use glycerin. You can not take it in its pure form, the soap with its contents will come in handy.
3. Resizing. A pinch of salt will preserve the volume of the slime and it will not shrink. It is added to the mass with water. After that, knead the toy with your hands. It is worth repeating the procedure every 4 days, as this will preserve its properties.

You can return the toy to its original shape at home. Better yet, maintain the consistency so it doesn't change and you don't have to constantly add different ingredients. Slimes are not kept at high temperatures. During the time when the toy is not used, it is placed in a hermetically sealed box in the freezer. Cold does not destroy the structure, unlike high temperature indicators.