How and which one is better to choose a hygienic shower, criteria and an overview of popular models, how to install it
A hygienic shower is a device that facilitates water procedures. From this point of view, a bidet is attractive, but the price is not always justified, it does not always fit into an ordinary bathroom, fitting between the wall and the toilet. Therefore, they choose a more practical, compact and affordable option. It is important to know how to choose the right hygienic shower so that it performs all functions and is comfortable.
General design
The hygienic shower is designed for personal hygiene.
This plumbing device replaces this type of equipment as a bidet, as it has many advantages:
- Convenient to use.
- Has a minimum size.
- Differs in the minimum cost.
- Easy to mount.
The simplest design of a hygienic shower consists of a mixer, a shower hose, a hand shower and fittings.
Valve
A valve shower is a simple design. Water is supplied by opening two valves, while one of them is responsible for supplying cold water, and the other - hot. By opening the valve to a certain extent, a person regulates the volume of water supplied.
Although the design is quite simple, there are many nuances that make it difficult to use. For example, you can figure out that you can only control the temperature by switching two valves at once. This is quite a long process, while it is not always possible to establish the required temperature indicator.
The shower for hygiene procedures is located on the wall, there is no insurance under it. Therefore, if the valve is leaking, you will need to put a new gasket on immediately or use a basin.
Lever
The water regulation is carried out with a single lever. It moves either up and down or side to side. It can be operated with one hand. Clearly this comes in handy when a person needs a quick water procedure after using the toilet or wants to wash the dog's feet after a walk.
But there are also some nuances. The lever is sensitive to the quality of the water flowing through it. There are two models (ball and cartridge). The first is a ball that rolls inside and opens in a certain position. The second mechanism is a construction of two plastics which open when necessary. Both types are equipped with diverging and converging holes, which is why water is supplied at a certain temperature.
The lever mechanism must be thoroughly cleaned, as even the smallest appearance of rust or light-colored plaque can cause loose closure. It is also important to check the quality of the incoming water, to exclude the possibility of entry sand or rust.
With thermostat
The thermostatic controller is the most popular type of hygienic shower. Its convenience is that you can immediately set the required temperature, and it will remain so until the new installation. You just need to press a button or turn a special lever, and water of the required temperature and pressure will flow from the tap.
Plus options with a thermostat - small children can use them on their own. They, not afraid of getting burned or getting cold, turn on the shower. But also the features are:
- The convenience of use.
- No water quality requirements.
- Minimalist design.
- Suitable for any interior.
But, alas, you have to pay for quality. Thermostatic showers are expensive. It will require the installation of a professional, while difficulties may arise with mechanisms regulated by touch controls.
Benefits of using
Such designs are not in vain popular.
Multifunctionality
The hygienic shower is multifunctional. This is its main advantage. With its help, you can:
- Follow hygiene procedures after using the toilet.
- Wash contaminated shoe soles.
- Wash your pet's feet after a walk.
- Wash the hands of the second person if the main sink is occupied.
Basically, a hygienic shower can replace a conventional sink. But best of all, it replaces the bulky bidet. In comparison, the shower is more compact, cheap, convenient to use and less expensive.
Compactness
Compactness is the main difference between a shower and a bidet.It can be simply hung on a special lever and left in this state until the next use. The space required is about 15 centimeters. This property is suitable for citizens who have ordinary bathrooms, in which there is a minimum of space between the wall of the room and the toilet, between the toilet and the bathroom.
Versatility
It can be used by both adults and children. At the same time, people's height and weight make no difference. Suitable for families with any number of people.
Availablity
The cost of a shower is significantly lower than that of a conventional bidet. You can buy it for the price of a regular bathroom shower, and sometimes even less. The peculiarity of this model is its limited functionality, there are no special accessories or a large selection of additional functions. But thanks to this, the cost is significantly reduced.
Ease of installation
A person who is far from the plumbing can also install a hygienic shower. Difficulties in installing the first two types (valve and lever) should not arise. But if we are talking about a shower that has a thermostat, then you need to call a professional.
Choice criteria
When buying, pay attention to these criteria.
Design features
The hygienic shower is quite simple in its design features. The plumbing fixture consists of:
- Pressure equipment is a classic mixer, with the help of which the temperature of water is regulated, as well as the strength of its pressure and other important characteristics.
- Water supply devices are an ordinary hose that reaches the toilet, usually the length from one to one and a half meters is quite sufficient, but in some cases this length is increased or decreased.
- The device for opening the water supply is a special bidetka, which is a fairly narrow watering can, equipped with a strainer.
Such equipment is not always complete. If the mixer is an ordinary faucet in the shower, then it will be much easier and cheaper to buy only a hose and a watering can. Also, such a measure is justified if a hygienic shower is installed near the sink.
Mounting method
There are different ways to install a hygienic shower.In this case, they choose the one that is suitable for a particular bathroom. There are options for sale with installation:
- Wall-mounted type - a conventional shower system is mounted on the bathroom wall, while the pipe can be installed hidden or open.
- Built-in type - installation is carried out on the rim of the toilet bowl or on the sink.
- Built-in - such a shower is more of a common addition to the toilet.
Installation features change if the hygienic shower has extended capabilities. In addition to the main functions, there may be a clothes dryer.
Choose a location for installation
The place of installation is selected depending on the characteristics of the room and the degree of individual comfort. You can mount both a freestanding structure and complete them with a washbasin or a toilet rim.
Constituent materials
The service life depends on the material of manufacture of the components. Be careful of:
- Mixer. The best options are stainless steel and brass. Bronze also shows quality. Aluminum and plastic models are absolutely not worth taking - they will last a couple of months at most.
- Pipe. Must be made of high quality molded rubber. It is elastic and durable. Cracks through which water will pass appear rarely and after a few years. It is better to choose a winding from polymers, nylon threads and aluminum tapes.
- Watering can. It will be better if this part is made of brass or stainless steel. They also select high quality plastic that will not rust or damage the bathroom or toilet if accidentally dropped from a height.
Manufacturer and cost
Popular models of hygienic showers are sold by the German company Grome. You can also see interesting models from other Germans - the company Hansgrohe. The hygienic showers of the Spanish company Genebre demonstrate quality. Rhak Czechs also sell cheap proven options.
Review of popular models
The following models are popular among buyers.
Lemark Solo LM7165C
Model with brass body. The main feature is that the mixer is integrated into the support for the watering can. It belongs to the single-lever type, the mechanism is ceramic cartridge.
Oras Saga 3912F
The watering can mount is on the wall, and the mixer tap is on the sink (horizontally). Ideal for a combined bathroom.
Millardo Davis DAVSB00M08
Mounted on sink. It has a beautiful watering can, laconic design.
Rossinka Silvermix Y25-52
Installation takes place on a vertical surface. It is distinguished by its small size, the possibility of embedding the support of the watering can in the body.
How can you install
Study the installation instructions.
With wall mixer
It turns out that this is a completely independent device. But the regulation is independent.
With mixer in the sink
The set includes a watering can and a hose. The shower will not be self-contained.
concealed installation
Concealed installation is suitable for laconic rooms. The eyeliner is hidden in a niche, which makes the shower even more elegant.
How to install the bidet cover
After removing the old one, apply and mount the mixer as follows:
- Hose connection.
- Inserting the assembly into the hole.
- Fixing the mixer.
- Review.
On the top floor, they are connected to the mains supply. The socket is rear mounted, the wiring as a cable conduit.
How to connect to the sink
Installation takes a few minutes. Replace mixer. It has a separate entrance. A flexible hose with a watering can is connected to it.
Rules of operation
Recommended:
- Regularly wipe the shower with flannel.
- Install the equipment correctly (for a WC, a wall-mounted one, for a bathtub mounted on a washbasin is suitable).
A hygienic shower is a useful device. Inexpensive, quick to install. Therefore, when choosing a bidet, you can take a closer look at it.