TOP 10 remedies to better clean an LCD TV screen at home
When cleaning an apartment, it is often necessary to wipe the TV. For modern LCD monitors, it is important to observe certain requirements so as not to spoil their coating. Asking yourself the question of how to clean the LCD TV screen, you should familiarize yourself with all the methods and choose the right one.
Reasons for contamination
Natural dust accumulation is the most common cause of monitor contamination. Also, fingerprints may remain on the TV.
What you should not do
When cleaning the screen from dirt, you must follow a number of rules. Several measures should not be taken as they may cause the device to malfunction.
Use liquid window cleaners
If the screen does not have a special protective coating, do not treat it with liquid window cleaners and solvents containing chemical components. When exposed to these substances, the monitor is destroyed.
Clean appliances included
Before cleaning, you must turn off the TV. In this case, it is not enough to press the stop button on the remote control. To ensure maximum safety when wiping down equipment, you should completely turn off the TV by removing the plug from the outlet.
Use a lint-free cloth
A soft, lint-free cloth is suitable for removing dirt. One option is microfiber, which is a versatile cloth for removing smudges, fingerprints, and smudges. Microfiber has the property of absorbing moisture, therefore, to remove coarse dirt, it is permissible to pre-moisten it.
Wash with water
If the screen surface is not wiped with microfiber, do not apply water or liquid products. This will cause a deterioration in the clarity of the transmitted image and the appearance of rainbow spots.
Can't scratch or scratch the surface
When wiping off dust and dirt, do not apply force, press the screen and scratch it. Otherwise, visible scratches or cracks will remain on the surface.
Special relationship with the LED surface
Equipment with LED surfaces must be cleaned with extreme care. Even slight mechanical stress can cause surface destruction.
Light until completely dry
Before turning on the device, wipe the screen or wait for the traces of the cleaning product to dry. This is necessary for security and screen protection.
Basic cleaning rules
Choosing the right accessory is an important part of cleaning your monitor. Modern liquid crystal displays can be cleaned with several types of fabrics using special products.
Special wet wipes for the maintenance of LCD screens
Cleaning wipes designed specifically for LCD TVs have a number of comparative advantages. Including:
- eliminate static electricity;
- safe to use;
- do not contain abrasive components that damage the screen;
- soaked in cleaning solution.
To clean the screen more effectively, it is best to combine dry and wet wipes. Two-stage cleaning removes dirt without leaving a trace of moisture.
Lint-free fabric
The LCD TV can only be cleaned with a lint-free cloth. Failure to comply with this requirement often leads to malfunctions and material damage. The lint-free cloth effectively and harmlessly removes dirt.
Microfiber cloths
This type of wipes helps remove accumulated dust, smudges, smudges and fingerprints. Microfiber is suitable for very sensitive surfaces, including LCD screens. By using microfiber cloths, there is no need to use additional chemicals. To wipe off coarse dirt, simply dampen a towel in clean water.
There is also a special spray for the treatment of microfibers.The spray contains an antistatic agent, which reduces the risk of electric shock after turning on the TV. An additional advantage is the formation of a protective layer on the surface.
Special means
The use of special products, which come in the form of gel, foam and aerosol, helps to improve the cleaning effect of the screen. The substances remove various impurities and leave an antistatic effect. When buying a cleaning agent, you need to make sure that there is no alcohol in its composition.
Freeze
The gel-like substances are easy to apply and will not leave marks when wiping the monitor. A small amount of gel is squeezed onto a cloth and the entire surface of the TV is treated.
Mousse
The foam is suitable for removing stubborn dirt. It is possible to clean the screen using foam without leaving traces or residues of the substance.
Aerosol
The cleaning spray is applied directly to the screen or to a cloth and wipe the surface in a circular motion. The aerosol is convenient for treating large screens.
Cotton swab for joint contamination
Since it is difficult to remove dirt in the joints with a cloth or towel, it is recommended to use a cotton swab. Thanks to the soft base, the stick will remove dirt and leave no residue.
How to clean the case
When cleaning, remember to clean the TV cabinet. Dust constantly accumulates on the sides, back and leg of the device and fingerprints remain.
dust off
It is enough to clean the case from the dust layer once every 2-3 weeks. You can wipe the device with a soft cloth.In the presence of severe contamination, it is permissible to use special cleaning agents.
When processing the back of the case, special care should be taken to prevent the penetration of substances through the holes.
Wash grease stains
It is easier to wipe off body fat stains with special napkins. You can also apply one of the special cleaning products to the fabric.
Traditional methods
A number of folk methods are not inferior to the use of special substances. Using the tools available, it is possible to effectively remove dirt from the screen without damaging it.
The vinegar
A safe wiping agent for an LCD monitor is a 3% vinegar solution. Instructions for use are as follows:
- vinegar essence is mixed with cold water in equal proportions;
- a soft cloth is dipped in the solution and the screen is wiped in a circular motion;
- with a clean, dry cloth, wash off the remains of gasoline;
- wipe the screen.
Soap solution
If, in addition to dust, other contaminants need to be removed, it is recommended to prepare a soapy solution. Any soap is suitable for this purpose, with the exception of laundry soap. Dissolve the soap in the water, dampen a cloth in the resulting solution and gently wipe the TV. Then wash off the soap stains and wipe the screen.
Isopropylic alcohol
Dry dirt and fingerprints can be removed with 70% isopropyl alcohol. The substance is diluted in cold water, observing equal proportions, a towel is dipped in the solution, squeezed out and the screen is wiped.
What substances are contraindicated
Some products cannot be used to wipe the LCD screen.They cause negative consequences and damage equipment.
Acetone
Acetone contains components that damage the LCD screen. Exposure to acetone often leads to breakage.
Ammonia
The effect of ammonia on the screen is similar to that of acetone. Ammonia is very active and not suitable for cleaning televisions.
Ethyl chloride
The substance has a characteristic odor and is flammable. The use of ethyl chloride for cleaning is prohibited.
Gasoline or solvents
Gasoline leaves permanent marks on the screen. Gasoline analogues affect in the same way.
Tinctures
Dyes have a chemical composition. Exposure to LCD screen will cause permanent streaking.
Abrasive cleaners
Using abrasive cleaners can scratch the screen. Also, do not use abrasive sponges.
Products containing alcohol
Alcohol will damage the protective coating on the screen. Subsequently, small cracks appear on the monitor.
washing powder and soda
Soda and powder particles may not dissolve completely in water. Touching the screen will leave scratches.
Napkins and paper napkins
Improperly processed wood components end up in paper products. Cleaning the screen in this case leads to defects.
Wet hand wipes
Wet wipes contain substances harmful to the anti-reflective coating. Also, unsuitable towels leave smudges on the screen.
remove scratches
Scratches on the screen interfere with TV viewing comfort. There are several ways to remove scratches.
Dedicated scratch removal kits
The easiest way is to use a special anti-scratch kit. Vaseline and varnish are common options.
Vaseline
A small amount of petroleum jelly is applied to a cotton ball and the scratches are processed in a circular motion. No need to press the screen when polishing.
Anti-scratch varnish
An anti-scratch varnish is applied to the defect and allowed to dry. It is important to dust the LCD screen before use.
Rules of care
You should wipe the screen every 2-3 weeks. The rule of thumb is to use proper cleaning products and tools.
Plasma Screen Cleaning Features
It is recommended to clean the plasma with microfiber and a special spray. This method will remove dust and create a protective coating.