Composition and technical characteristics of Bergauf tile adhesive, instructions for use

People renovating a bathroom are often faced with the need to install tiles on the walls or floors. To perform such work, you need to use a special tile glue "Bergauf". However, before using such a tool, you should familiarize yourself with its description and recommendations for use.

Special features of the manufacturer Bergauf

Bergauf is considered a high quality elastic adhesive that is often used for ceramic tiles or small decorative stones. Experts recommend using it for lining the interior walls of a room. However, the properties of "Bergauf" allow it to be used as an exterior wall covering.

The adhesive has high strength and good adhesion. Thanks to this, ceramic tiles glued to a horizontal surface will not move. Another feature of the product is its heat resistance, which allows it to be applied to heated surfaces.

Composition, properties and technical characteristics of the different varieties

There are five manufacturers that produce high quality glue.Before buying a wall covering adhesive mix, it is recommended that you familiarize yourself with the characteristics of the different brands of tile adhesive mixes.

Keramik

Many people who are often engaged in wall cladding recommend using a special "Ceramic" glue. It has good physical and mechanical properties, which are several times better than the basic adhesive. "Ceramic" is considered a plastic and moisture resistant agent, which allows its use in rooms with high humidity.

For example, it is often used in swimming pools, saunas, bathrooms or toilets.

This glue is considered the ideal mixture for laying porcelain stoneware and ceramic materials. It is distinguished by its resistance to temperature changes and has a considerable moisture absorption coefficient. In addition, the advantages of "Ceramics" are:

• strength, due to which the composition can be applied to bends;
• setting speed, which is twenty hours;
• frost resistance and high temperature indicators.

Look at Also

Features and varieties of edge glue, selection criteria and how to do it at home

Keramik Pro

The most popular tile glue is considered to be the reinforced composition "Ceramic Pro", which is often used for wall cladding. Such a solution is considered highly elastic and durable. Most often it is used for laying large-sized ceramic tiles or medium-sized decorative stone. "Ceramic Pro" is universal, as it can be used both indoors and outdoors.

Before using "Ceramic Pro", you should understand its main features:

• Increased flexural strength, which is about 2-3 MPa.
• Resistant to sudden temperature changes."Ceramic Pro" does not lose its properties at temperatures from -60 to +90 degrees.
• Rapid solidification of the applied mixture. The glue dries in 10 to 12 hours.
• Low consumption of the composition. To process one square meter of area, you will need one and a half kilograms of solution.

Praktik

Some builders prefer to use not "Ceramic", but "Practical". This composition is recommended to be used for mounting tiles made of silicate stones or concrete mixtures on the surface of walls. "Praktik" is made from split sand or synthetic components. These substances make the product several times stronger and more durable than other tile adhesives. "Praktik" has frost resistance, which allows it to be applied to surfaces both inside and outside the premises.

It is recommended to become familiar with several characteristics before using the mixture:

• Strength maintained even in places of compression. This figure is 4-5 MPa.
• Tolerance to various temperatures. The solution is able to transfer values ​​from minus fifty to plus eighty.
• High hardening speed. The applied composition hardens in thirty hours.

Isofix

"Isofix" is considered a universal adhesive, which can be used for gluing not only ceramic tiles. Also, such a tool is suitable for gluing polystyrene and glass wool. Some experts recommend using Isofix as a reinforcing agent when decorating the facades of buildings.

The advantage of this composition is that it can be used for bonding deformable and non-deformable coatings.

Among the main characteristics of “Isofix” are the following:

• High adhesion on most substrates. The value of this indicator is 1-2 MPa.
• Resistance to low temperatures."Isofix" is able to withstand temperatures below 30-40 degrees frost.
• Solidification rate. The glue hardens within an hour and a half after application.

Look at Also

Types, features and areas of application of Ceresit tile adhesive, how to breed

Mosaic

This is a high quality moisture resistant compound ideal for finishing swimming pools, bathrooms, saunas and other high humidity areas. The properties of "Mosaic" make it possible to use it for laying tiles not only on walls, but also on floors equipped with an additional heating system.

The mosaic has the following characteristics:

• High moisture absorption coefficient. It's about five percent.
• Quick drying solution. The mixture has time to dry in 4-5 hours.

Rules and Instructions

Before using tile adhesives, you will need to understand the instructions for their use. The process of using the tool takes place in several stages:

• Preparation of the working solution. To create a sticky mixture, you need to add 3-4 kilograms of funds to a liter of water.
• Infusion. The liquid should be infused for an hour and a half.
• Surface preparation. The coatings on which the product will be applied are cleaned of dirt and, if necessary, leveled.
• Application of composition. After preparing the surfaces, the tiles are laid.

How to choose the right composition

There are several recommendations that will help you choose the right solution for laying ceramic tiles. When choosing, you should pay attention to the following:

• Compound. It is recommended to use products containing sand and cement. Adhesive mixtures containing latex and polymer additives are also considered high quality.
• Base type.It is necessary to take into account the type of substrate on which the tiles will be laid.
• Grip level. It is necessary to purchase quality products that are securely attached to most surfaces.

Calculation of consumption

It is recommended to determine in advance how to correctly calculate the expenditure of funds. Most manufacturers indicate the base consumption on the surface of the package. Most often it indicates how many kilograms of solution will be needed to process one square meter of surface.

However, sometimes there is no such information, and people have to calculate everything themselves. For this, the following formula is used: S * r * h/2. In this case, S is the base area, r is the base rate per square meter, and h is the height of the trowel teeth.

Look at Also

How to Use Foil Glue Correctly and a Review of the Top Brands

Additional tips and tricks

There are a few additional tips to follow when using tile formulations:

• it is necessary to mix the glue with water, observing the optimal proportions;
• apply the composition evenly, with a spatula;
• before using the composition, the surface is prepared.

Conclusion

When laying tiles, you can use high-quality Bergauf tile adhesive.

Before using the solution, it is recommended to familiarize yourself with its features, brands and usage tips.