Step-by-step instructions on how and what is better to glue a soccer ball

People often wonder how a soccer ball can be glued. To solve this problem, it is necessary to strictly follow the rules of the procedure. First, you need to find the area of ​​the puncture. After that, it is important to choose the right adhesive composition. Effective remedies include rubber glue or superglue. In order to achieve reliable fixation, the technology of the procedure should be strictly observed.

How to Find a Puncture on a Soccer Ball

Often there are situations where the ball does not hold air, but it is not possible to visually identify the damage. To detect such areas, it is recommended to pump the product and immerse it in water. Air bubbles will begin to emerge from the perforated area. It should be borne in mind that before starting the repair, the product must be completely dried.

What is needed for the repair

For the repair to be successful, you need to prepare everything you need in advance. For this, an adhesive composition and other tools are used.

rubber glue

The rubber ball can be sealed with rubber cement. Gummy would be a great option. This tool is affordable and has many positive reviews. The substance is quite simple to use. To do this, apply a thin layer of glue to the hole and let it dry. It will take 5-10 minutes. Then the procedure must be repeated. After the second layer dries, the product can be inflated.

great glue

Superglue is also very effective. The substance can be applied with a knitting needle. This will allow the composition to reach the surface and into the hole.

A piece of rubber or a finished patch

You can use a piece of rubber to seal major damage. There are also special patches on sale. It should be borne in mind that self-adhesive materials are considered less durable. Therefore, it is recommended to choose conventional means and apply the composition to fix yourself. It is recommended to treat the damaged area with acetone before the procedure. After that, the glue should be applied to the ball and the patch. First, you need to remove everything unnecessary from it and leave 2 centimeters around the puncture.

Look at Also

What is the best glue for bathroom tiles, criteria and features

Sharp knife or scissors

These tools are needed to cut the patch fragments. It is important to use the sharpest tools possible.

Acetone

This substance is necessary to degrease the surface of the product and the patch. It is strictly forbidden to use gasoline or solvents for this purpose.

How to fix

It is recommended to wash the ball for the repair to be successful. This should be done with a mild remedy. Then dry the product under natural conditions. It is recommended to degrease the damaged area.To do this, you need to use alcohol or acetone.

It is recommended to repair a sports device according to its type and the characteristics of the damage. A tubeless ball is easier to retrieve. However, there are ways to fix your camera. It is recommended to glue the ball in the deflated state. Constant airflow will cause the adhesive to lose adhesion.

If a small hole

The smaller the size of the damaged area, the easier it is to repair the puncture. To repair a volleyball or soccer ball, do the following:

1. Find a hole on the surface.
2. Seal the hole with rubber cement.
3. Wait the required time. In this case, it is worth following the instructions given on the adhesive composition.

It is allowed to repair the ball with superglue. To apply this substance, you need to use a knitting needle. Thanks to this, the glue will fall not only on the surface of the product, but also in the hole.

Without cutting the surface

To perform surface gluing of the ball, it is worth using a special patch. Stores sell ready-made products - they are covered with glue. These patches are convenient and easy to use. It is also allowed to take them on the road.

To carry out repairs, proceed as follows:

1. Degrease the damaged area.
2. Cut anything unnecessary from the patch. This is done so that the agent extends slightly outside the hole.
3. Peel off the adhesive surface of the patch.
4. Attach the product to the ball.

It is also allowed to use patches that do not have an adhesive layer. They include a rubber layer and are used in combination with super glue. Also, to fix such patches, a rubber compound or a second agent is often used.

Look at Also

How can penoplex be glued at home for interior and exterior work?

Interior sealant

Sometimes experts use sealant to repair a camera. It is used from inside the ball. For the procedure you will need a syringe without a needle. It is recommended to fill it with putty. Then squeeze the substance into the damaged area of ​​the chamber. This method is used for minor injuries. It does not require cutting the ball.

If the camera is torn

If the chamber is damaged, the ball should be cut off at the inflation hole. To repair the product, you must follow these steps:

1. Find the damaged area.
2. Make a rubber patch. It should be slightly larger than the damaged area.
3. Cover the patch with superglue.
4. Squeeze well and let stand 1 to 2 minutes.
5. Blow up the ball and put the camera back.
6. Glue the camera and the case.
7. Sew the incision area with nylon threads.

It should be borne in mind that the rope chamber is almost impossible to repair. In such a situation, the ball will have to be thrown.

Can the bouncing basketball or ball be repaired?

It is recommended to use a repair kit to seal the hole in the rubber ball. Universal formulations are manufactured by INTEX. Includes VINYL CEMENT superglue. It also contains a transparent patch measuring 5x10 centimeters. You can buy such a kit in a sporting goods store or on the market. The adhesive hardens almost instantly. Therefore, it is often called cold welding. A clear transparent patch will not be visible on the product.

If you have the opportunity to visit a hunter or angler's store, you can purchase a PVC boat repair kit. The composition contains pieces of rubberized fabric and a small bottle of special glue.

This kit provides complete damage repair. Moreover, the process takes a long time. In addition, such a kit is quite expensive. In some cases, it is more advisable to buy a new ball. To properly stick the product, you must follow these steps:

1. Find the exact puncture site. It will be possible to identify the damaged area with a soapy solution.
2. Prepare a patch of the required size. It should have rounded edges.
3. Apply adhesive to both surfaces.
4. Secure and press patch firmly.
5. Inflate the balloon and leave it in this state for several hours.

Look at Also

Descriptions and varieties of types of Vetonit glue for tiles, rules for choosing a product

If during the check it was possible to see that air from the product is coming out of the teat, it is recommended to glue it from the inside.

To stick a volleyball, you need to do the following:

1. Find the damaged area.
2. Degrease the surface with acetone.
3. Place a tourniquet in a small hole. It is best to use a ready-made set.
4. For severe damage, it is worth using a patch. It must be glued and placed under the press. Then pump the product and assess its integrity.

To avoid having to repair the ball, you should follow these recommendations:

1. After active recreation in the fresh air, it is recommended to remove dirt with a damp cloth or cloth. To get rid of stubborn dirt, use a liquid soap solution. In this case, do not use aggressive cleaning agents.
2. It is recommended to dry the ball in a well ventilated place. This should not be done near heating devices. If product is too wet, an old towel will help remove excess water.
3. Storage temperature should be maintained at + 6-23 degrees. The ball should not be exposed to direct sunlight.It is also recommended to protect it from high humidity and frost.
4. Bonded rubber products should be kept inflated.

You can glue the ball in different ways. To get great results, you need to choose the right adhesive and the right patch. Strict compliance with the rules of procedure is not negligible.