Types and requirements for glue for puzzles, evaluation and use at home
Puzzles are a fun activity that requires patience and attention, especially when the picture is complex and consists of many parts. Once the puzzle is assembled, it can be saved. You will need glue to create the puzzles, a base and tools. With the correct selection of consumables and careful gluing, a bright image is obtained with which you can decorate the interior of the room.
Adhesive Requirements
The composition for gluing puzzles must meet a number of requirements:
- be clean, litter and grain free;
- have a consistency that is not too liquid and not spread;
- thicken no later than three hours after application;
- be elastic;
- have a light color or have transparency;
- the smell of glue should not be harsh and unpleasant;
- The absorbency should be moderate so that the paper of the assembled puzzles does not get wet.
What varieties are suitable
In order to reliably connect the puzzles into a single picture, various means of gluing are used. Special glues intended for other household purposes are used.
Specialized
With a set of puzzles, a special glue is often put in the box. It has a liquid consistency, is able to penetrate between the elements, firmly connect them. Odorless and colorless glue, it can form a glossy layer on the front side, after which the image does not need to be varnished.
AVP
The properties of special glue and PVA do not differ much. To reliably connect the assembled puzzles, PVA is applied to them on the front side with a brush, thereby filling all the seams and gaps. After drying, the white spots will become transparent and form a matte film on the surface of the pasted image.
After that, the glue is applied to the reverse side and everything is fixed on the base prepared in advance.
Vinyl floor wallpaper
The elastic adhesion of the elements can be achieved after applying the glue for vinyl wallpaper. The advantage of the composition is the ability to prepare glue of different thicknesses.
Rating and opinion of the best brands
There are several brands of puzzle glue available in specialty stores. They differ in the quality of adhesion and the appearance of the glued elements.
jigsaw step
Step puzzle glue is odorless, dries after 2 hours, 80ml is enough to stick 1000 puzzle pieces together. It is poured onto the front surface of the paint in two layers with a break of 1.5 hours. A thin transparent film forms. If the details were slightly torn, thanks to the Step puzzle, they are perfectly connected and become uniform. It is necessary to strengthen the image from the back by applying another layer of glue to it.
Ravensburger Puzzle Canned
The glue is practical to use because it comes in a can of 4000 elements.The liquid comes out of it through the foam nozzle, which does not dry out and remains in working condition for a long time. Ravensburger dries in an hour, forming a glossy film on the surface of the puzzles. After application to the front side, the paint does not need to be turned over, as the final quality of the joint is high.
KSK-M
Using a bottle of KSK-M synthetic glue, you can assemble a mosaic with an area of at least 0.4 square meters. After application on the front side in several layers, the drying time is about 2 hours. Until this happens, it can be washed with soapy water.
Educa
The glue for fixing the puzzles is released in a balloon, in the upper part of which there is a sponge, the composition is squeezed on it and applied to the outer surface of the picture. The glue dries in an hour, does not leave streaks and streaks. One container is enough to fix 5000 elements.
"Ginger cat"
A bottle of Ginger Cat glue has a dispenser through which the composition is squeezed onto a finished image or a small piece of sponge. With slight movements, it spreads over the surface of the assembled puzzles. Two hours after drying, the painting is placed on the base and in the frame.
Fix Puzzle Keep Permanent
By using this brand of glue, you do not need a brush, since the bottle is equipped with a sponge nozzle. A picture composed of puzzles is wiped off, and the composition is applied to the front part so as to touch all the gaps and crevices. First shake the bottle.
The glue is white, after drying it becomes transparent, the picture acquires brighter colors. Economical consumption, complete drying - about 3 hours.
How to paste it into a picture at home
To correctly glue the image of the puzzles, you need to perform a number of actions:
- Prepare all the necessary tools and materials.
- Place the stitched image on a flat surface.
- Apply glue to the front surface of the mosaic with a sponge.
- Dry for 2-3 hours.
- Flip the image.
- Apply a layer of glue on the wrong side.
- Lay the base and roll it with a roller.
- Dry for 8 hours.
What is necessary
To work, you must prepare:
- base;
- glue;
- brush;
- foam sponge;
- foam roller;
- the scissors;
- blade.
Base
For the base on which the image of the puzzles is glued, use:
- fiberboard - suitable for large mosaics;
- cardboard - easy to use, easily fixed with any glue;
- Styrofoam - easy to cut and stick to puzzles;
- fabric - tulle, gauze, canvas are used, gluing from the outside is necessary;
- ceiling tiles - flat, without patterns or bends are used.
Glue and brush
The brush is chosen depending on the thickness of the glue. For a viscous composition, hard ones are preferable; for a liquid composition, you can use foam brushes.
foam sponge
To level the layer of glue in the seams and on the surface of the puzzles when cutting, sponges of different sizes and shapes are used. Some glue bottles have a foam pad that replaces both a brush and a regular sponge.
foam roller
After applying the picture to the base, it should be rolled with a foam roller for better distribution of glue and fixation. The roller can have different shapes and sizes. It is worth choosing a convenient tool to use.
Scissors or blade
Sharp scissors with long ends or a blade will be needed to trim the edge, remove roughness from the connected puzzles, create the base of the picture.
Application of a special composition
Clementoni is an Italian-made glue produced in the form of small granules. It's easy to use - the composition is diluted in warm water in a ratio of 1: 3. Care should be taken not to form lumps, the granules are completely dissolved in water. The glue needs time to infuse. Only after that can you start working.It is easy to firmly glue the puzzles to each other, and then to the base, if the composition is properly diluted and evenly applied to the surface.
How to Combine Using Other Compounds
The mosaic can be assembled using self-adhesive film. The required length is cut from the roll and connected to the picture, previously turned over with the back side up. The "wrong side" of the film is lined with squares, with the help of which it is easy to score, cut and glue the base of the required size.
Additional tips and tricks
The easiest way to stick puzzles together is to use double-sided tape. It is laid on the base, and the coins are collected from above. The mount is not the most reliable, but the option is not laborious. You cannot use glue or other materials at all if, after collecting the mosaic, you place it under glass in a frame.