15 ways to quickly unclog and unclog a sink

Even tidy housewives eventually encounter blockages in the sink, which makes drainage worse. Some trust specialists to clean the pipes, but you can clean the pipes yourself. Before that, you need to familiarize yourself with how to clear the blockage in the sink and what means to use at the same time.

Reasons for clogging

Before you start cleaning, you should familiarize yourself with the main causes of blockages. These include in particular the following:

  • Mechanical. Most often, the sink is clogged due to mechanical blockages, during which foreign objects and debris get into the pipes. Gradually, the amount of debris accumulates and the water begins to flow worse through the pipes.
  • Operational. Operational reasons include the accumulation of grease inside the pipes or the appearance of corrosion.
  • Incorrect installation. Sometimes the kitchen is equipped with incorrectly installed pipes. Problems can arise if they are installed at the wrong angle, which gradually accumulates debris inside.

Basic methods at home

There are several effective ways to remove blockages from your sink.

Boiling water or hot water

This is the most common method that can restore the water drain and unclog the pipes. To get rid of contamination, you will need to prepare a heated or boiled liquid in advance. Then one and a half liters of hot water is poured down the drain, and the procedure is repeated after half an hour.

People who have installed plastic pipes should not use boiling water. Therefore, ordinary hot water is poured into the pipes, heated to 50-65 degrees.

Clean a clogged pipe with a plunger

To remove minor blockages, you can use a conventional plunger. Before using it, you need to tightly close all unnecessary holes in the sink with a damp cloth. Next, a piston must be replaced by the drain hole and with a sharp movement push it and pull it towards you. These steps are repeated 2-3 times so that the plug of debris inside begins to break apart. After that, hot water is poured into the pipes to clean the remaining dirt.

soda and salt

If the sink is clogged, use an effective cleaning solution of salt and baking soda. To prepare it, you will need to mix 200 grams of baking soda, 90 grams of salt with warm water. Then the created solution is poured into the drain slot and left there for 15-20 minutes. After that, use a plunger to clear the blockage and flush the pipes again. If this does not solve the problem, the procedure is repeated.

If the sink is clogged, use an effective cleaning solution of salt and baking soda.

Use vinegar and soda

An effective popular solution of baking soda and vinegar will help clean the sink.When these components are mixed, a foamy liquid is obtained that is able to dissolve debris and dirt inside the sink.

To remove the blockage, you need to pour 100-200 grams of soda inside and pour 100 milliliters of 9% vinegar. Then the drain should be covered with a solid plug on top so that foamy liquid does not flow out. 10-15 minutes after pouring, the sink is opened and rinsed with boiling water.

"Alka Seltzer"

Sometimes people don't have baking soda available and have to use Alka-Seltzer instead, which is capable of removing all the debris and dirt from a clogged sink. This drug can be used not only to clean pipes, but also to eliminate unpleasant odors.

It is very easy to use Alka-Seltzer. Two tablets of the drug are placed in the drain, after which acetic acid is poured inside. When the hissing inside stops, hot water is poured in, which should break through the blockage.

A vacuum

Some people don't want to use cleaners and prefer to clean blockages with a regular vacuum cleaner. This method will be useful if the pipes are slightly clogged. For cleaning, a vacuum cleaner is suitable, which has an air blowing function. Before blowing, the vacuum tube is carefully wrapped in a thick cloth, after which it is installed in the drain hole. Next, the device includes a blow mode to push through the blockage.

Some people don't want to use cleaners and prefer to clean blockages with a regular vacuum cleaner.

Hydraulic pump and soda

When removing deposits from pipes and clearing blockages, a hydraulic pump is often used. Before using the device, water with soda is poured into the drain to soften the blockage a little. Then the hydraulic pump is filled with hot water and connected to the drain.Strong water pressure from the pump should push through the debris plug. If after the procedure the water drains poorly, you will have to use the hydraulic pump again.

Boer

If the blockage is too big and the water has completely stopped flowing from the sink, you will need to use a drill. First, an empty bowl or bucket is placed under the sink. Then you need to carefully unscrew and remove the cap. After that, a strong thread is pulled inside the clogged pipe.

If there is a lot of debris and dirt inside, use a powerful cleaning and drilling tool.

Special means

There are several types of blockage cleaners.

Liquid and gel

The most commonly used products come in gel or thick liquid form.

"Sanford"

Sanfor will help remove waste from the sink. It is a thick gel mixture specially formulated to clear blockages and clean sewer pipes. The dense structure of "Sanfor" allows it to penetrate deep into the pipe and get rid of clogs, even if there is still water inside. "Sanfor" is poured into the drain and left in it for an hour and a half. Then it is washed with boiling water.

"Sanfor" is poured into the drain and left in it for an hour and a half. Then it is washed with boiling water.

"Turbo Tire"

Dash Turbo is especially popular among housewives. It is a versatile tool that will help clean metal and plastic drain pipes. Also "Dash Turbo" is used to avoid blockages. 200 ml of liquid is poured into the drain with hot water. The procedure is repeated if debris remains inside the sink.

Drain opener

An effective remedy for serious and minor blockages. The liquid contains chlorine, sodium, potassium and other active substances that help eliminate blockages in the pipes.Of the minuses of Deboucher, they are distinguished by the fact that for one-time cleaning of the sink, 500-600 milliliters of liquid are consumed.

Loose powder or granules

When cleaning sinks, you can use granular products or special powders.

Bugi Pothan

This powder is made from caustic soda and used in dissolved form. It is necessary to use "Bugi Potkhan" very carefully, as it has an unpleasant pungent smell.

Experts advise wearing a gauze bandage and rubber gloves on the hands when applying the powder. One use of powder is enough to clean the pipe.

"Mole"

The most commonly used chemical agent in daily life is "mole". It is made from acetic acid, potassium and sodium hydroxide. The advantages of "Mole" include its efficiency, low cost and ease of use. It is enough to use the "Mole" once to clean the sink for a long time.

The most commonly used chemical agent in daily life is "mole".

Chirton "Clean the gutters"

Highly effective product manufactured to remove blockages inside pipes. One bottle is sufficient for 2-3 applications. Chirton does not work immediately, so it is necessary to flush the pipes only 20 minutes after using the drug.

Manual

For most cleaning products, follow these steps:

  • Pour the composition down the drain. To begin with, the product is poured into the sink. If necessary, mix it with lukewarm water so that the mixture is not thick.
  • Wash the sink. After 10-30 minutes after applying the detergents, the pipe should be washed with water.

Rules for using a plumbing cable

A special plumbing cable will help break through the cork. To clean the sink, the cable must be carefully inserted into the pipe.Then it needs to be raised and lowered to get rid of the debris. The procedure is carried out within 10-15 minutes.

Tips for cleaning plastic pipes

If a plastic pipe is clogged, you will need to clean it with chemicals. Mechanical cleaning with a cable or a drill is contraindicated, as this can damage the walls of the product. Means containing sodium and potassium hydroxide are considered effective.

How to dismantle a siphon quickly

To dismantle the siphon, you need to carefully unscrew the sump and clean it of water. Then all fasteners are unscrewed so that the siphon can be removed more easily.

Prophylaxis

To prevent the sink from clogging, you need to clean it regularly. You should also try not to clog the pipes with debris and dirt. Therefore, before washing dishes, all plates and pans are pre-cleaned of food debris.

Conclusion

Housewives are periodically faced with the need to clean the sink. Before that, you need to familiarize yourself with the cleaning products and the features of their use.



We advise you to read:

TOP 20 tools only to clean an artificial stone sink in the kitchen