How to clean wax and on-ear headphones, Apple EarPods

It is necessary to clean your helmet regularly, like this:

• extends quality use time;
• hygienic: a dirty device is a breeding ground for germs;
• aesthetics and increases self-respect.

The speaker mesh is gradually clogged with dust, lint, grease from skin contact and earwax. By the way, the more headphones a person uses, the more sulfur is released.

What is necessary

Everything necessary for the procedure is selected according to the, how we are going to clean the headphones. That is, depending on the characteristics. Since you have to take care of small details, the work will require attention and precision.

Hydrogen peroxide

The hydrogen peroxide (H2O2) will act as a solvent for grease, dried dirt and sulfur, and will disinfect the cleaned parts.It must be in a dark, unexpired bottle. Otherwise, ordinary water (H2O) may appear in the bubble.

Hydrogen peroxide is a good dielectric and perfectly dissolves earwax.

Sometimes alcohol is used instead of peroxide.

small capacity

It can be a lid from a bag of juice or milk, a salt shaker or a glass. The main condition: thoroughly washed.

Cotton swabs and discs

Buy at the pharmacy. Sticks can be made by yourself by carefully screwing a piece of cotton wool onto a match. Discs are suitable for cosmetics.

toothpick

If for some reason there are no toothpicks, you can get by with matches. Carefully sharpen matches with a sharp knife.

Scotch

Regular narrow. May be needed to repair individual parts.

Bgreasy towel

Paper towels or napkins will be needed to dry off. Clean rags will also come in handy.

General cleaning rules

If you haven't used the headphones yet, consider the following:

• As experts recommend, it is necessary to clean the helmet from sulfur and other possible debris 2 times a month. This will preserve the sound quality for years to come.
• For contamination cleaning, hydrogen peroxide or alcohol is usually used. It is difficult to overestimate the disinfecting properties of peroxide, so it is preferable.
• If there is no confidence and skill to properly disassemble and clean the headphones, it is risky to undertake this activity on your own. You can just lose a good thing.
• The scheme of work depends on whether the headphones are disassembled or not.

Look at Also

TOP ranking of the 30 best brands of DIY dishwashing and kitchen detergents

What to do if the model does not include

After studying the existing model, we came to the conclusion that it is impossible to dismantle it without completely damaging it. Then it remains to clarify how to clean such headphones, collect the necessary accessories and get to work.

The command is:

• all parts of the headphones (heads, wires, plug, switch) must be disinfected with peroxide or alcohol;
• clean the threads of the headphones with a toothpick from sulfur and other dirt;
• lower the cleaned heads for a quarter of an hour into a container with H2O2, fix them with tape so that only the threads enter the liquid;
• when removing the container, do not turn the parts upside down, otherwise the liquid may enter the speakers;
• then, moisten the sticks in peroxide and squeeze out excess moisture, carefully wipe the threads;
• clean the grooves around with a toothpick;
• finally, wipe all components with peroxide and lay the headset with a net on a towel for 3 hours;
• check the result by connecting them to your phone or tablet.

Additionally or as an independent method of cleaning undisassembled headphones, a conventional vacuum cleaner is used. Manual more practical. Provided that a special accessory is needed for this. Home made. It is then that with the help of plasticine and a small tube with a diameter equal to the size of the mesh, a structure is created, which is then inserted into the vacuum pipe.

By adjusting the suction power, you can clean the headset mesh quickly, reliably and without exposing the speaker to possible exposure to liquids.

The subtleties of cleaning various products

Knowing how to clean headphones in general, you need to take into account the peculiarities of different models.

Empty

Vacuum earphones (in-ear) sit perfectly in the ear, transmit sound quality and absorb external noise. Their feature is silicone or rubber pads (ear cups), which provide some comfort.

In close contact with the ear canal, the heads with the speakers are noticeably contaminated with gray and sebum, and when stored in pockets, they also receive all kinds of small debris. Cleaning the disassembled vacuum earphones is as easy as taking them apart. The main thing is to be attentive to the process due to miniature details.

1. The ear pads are removed, cleaned with cotton swabs soaked in peroxide, wiped with cotton swabs or a cloth and set aside.
2. The fillets are transferred with tweezers, or by gently lifting with a needle, into a container prepared with hydrogen peroxide or alcohol.
3. Fillets are kept in alcohol for up to 10 minutes, in peroxide - up to 20.
4. Use cotton swabs to gently rub the headphone cavity around the speakers.
5. Spread the pieces out on a paper towel until completely dry.

Look at Also

How to clean an air conditioner with your own hands at home, the best remedies

It remains only to recover the headphones.

Listeners

Inserts are also called droplets. The simplest designs are not separable. Sulfur and other contaminants in this case are cleaned with a toothpick and a cotton swab or disk. For foldable models, the lid is unscrewed, the mesh is cleaned of large sulfur chunks with a toothpick, then cleaned and disinfected by soaking in alcohol or H2O2. Then wipe gently with a cotton swab. Disinfect mating parts, dry and collect.

Air

Full-size over-ear headphones are equipped with soft ear pads, which are contraindicated in excess moisture. The speakers do not come into contact with the skin. Most of the time they get dirty due to dirty hands. Thus, cleaning the liners consists of treating the interior surfaces with peroxide using a cotton ball.

H2O2 cleans and disinfects at the same time. The exterior is carefully wiped with a cloth or sponge soaked in soapy water.

If it is more convenient to handle the liners separately, you can try removing them. Sometimes a Phillips screwdriver.

Apple earphones

Later models of Apple headphones can be cleaned in the same way as EarPods. This information is therefore relevant for all iPhone and iPad owners. It is not profitable for the company to have the craftsmen dismantle the helmet themselves, which is why it (the helmet) is "welded" so that few people want to risk it.

The difference between these "non-separable drops" is that the EarPods have more than one large common speaker, like their counterparts. It is therefore necessary to clean two grids of different sizes: the central and the side. The process includes the following points:

1. Carefully pick up the sulfur pieces along the outline of the two grates with a toothpick.
2. Moisten a cotton swab with peroxide and wring it out with a towel. When he was only wet.
3. Rotating the earpiece so that moisture does not enter the speaker, gently wipe the grilles.
4. Wipe the earpiece completely with a damp cotton swab.
5. Repeat the same with the second earphone.

The work area should be as bright as possible so that no mistakes are made when cleaning Apple EarPods.

How to clean your ear pads

In addition to being unsightly, dirty ear pads can lead to inflammation of the middle ear. Genuine leather and leatherette ear cushions are wiped with a cloth dampened with soapy water. Fabrics are suggested to be treated with an alcohol solution.

In the event of particularly heavy soiling, a good wash is also recommended for fabric linings:

• the ear cushions are removed;
• wash in warm water with laundry soap;
• wring out, wrapped in a towel;
• dried.

If you need to "update" the ear pads, you should pay attention to the recommendations of the headset manufacturer. Perhaps there are specific suggestions already in the instructions.

Look at Also

TOP 15 remedies, how and how to clean bronze at home quickly and effectively

How and what to wipe the threads

The wires are easy to clean with just a damp cloth. The dirtiest are treated with hydrogen peroxide or alcohol. Remove stains with a sponge or soft brush.

How to clean your phone's headphone jack

If the headphone jack is visibly dirty, sometimes even contact is lost. Clean the connector in the following order:

• turn off the phone;
• tightly wrap a piece of cotton on a toothpick;
• moisten it in alcohol, soak it with a napkin and, turning it over in the nest, carefully wipe off the signs of oxidation;
• repeat several times until clean cotton wool.

How to whiten the casing

White headphones get dirty faster and lose their festive look. You can whiten the case of your headphones using an acetone-free nail polish remover. Dampen a cotton ball and gently wipe all surfaces.

The speaker grilles are cleaned as usual.

Maintenance tips

With practice, a certain set of earphone care rules has developed:

• store in a purse or special case;
• periodically change the liner;
• do not allow liquid to get inside;
• clean monthly.

And now we know how to clean headphones.

In addition, you must follow the rules of personal hygiene:

• ears and hands should always be clean;
• do not allow anyone to use their headphones.

The intricacies of caring for full-size models

Ear pad requirements are in addition to regular care rules. Dust collects in soft pads, possibly dandruff buildup. Therefore, special attention is paid to dry cleaning and sometimes even wet cleaning.

They are cleaned with a stiff brush or vacuum cleaner, wiped with alcohol or soap solutions, depending on the material. Change of time when worn.

What to do if you are hit by watera

If the device falls into the water, the main thing is not to be afraid, but to take the following measures:

1. Do not waste time.
2. Try to gently shake off the liquid as completely as possible.
3. Dry with a hair dryer or other heat source.
4. Check functionality.

How to store so as not to be mistaken

This is a constant concern of many: before connecting the earphone, it must be untangled for a long time. What's the best way to store it until you need it?

1. In a particular case.
2. Roll up the cardboard like a spool and place it in an appropriately sized plastic bag.
3. Fold like a clothesline and bring the tip with the cork inwards. It would also be good to keep in a separate bag.
4. Himself "smash his head" and come up with an even better option.

The main thing is to think about it.