How to clean any mouse from dirt at home step by step
Taking care of the individual components of the computer, you should definitely know how to clean the mouse from dirt. Each type of mouse has its own cleaning characteristics. First you need to prepare all the necessary tools and devices. If it is very dirty, it is better to disassemble the mouse. All actions are carried out carefully, observing a number of requirements in order to exclude damage and damage.
Reasons for contamination
Computer equipment must be well maintained. Mouse contamination occurs for the following reasons:
- dirty work surface of the table;
- rare cleaning of the mouse pad from dust;
- working with unwashed hands;
- eat and drink near the computer;
- rare preventive cleaning of the surface.
If preventive cleaning is not carried out in time, the accumulation of dirt and dust will have adverse consequences:
- the equipment will not work properly;
- some functions may not be performed;
- complete breakdown.
To avoid these problems, the mouse should be kept clean. Otherwise, the computer will slow down. The cursor lingers in one place, each click is triggered multiple times, and the work process slows down.
Cleaning a computer mouse quickly has a number of positive aspects:
- the mouse will still be in good condition;
- service life will increase;
- the response improves.
If you have to disassemble devices, there may be inconveniences. Incorrect disassembly can damage the equipment. An inexperienced computer user may have problems assembling the mouse.
What is necessary
A number of tools are needed to clean quickly, safely and efficiently.
Q-tips
Using cotton swabs of different diameters, they remove dirt particles from hard-to-reach places.
Several mats
Mats are handy for storing collapsible parts. In this case, no parts will be lost, and the structure will be correctly assembled.
Cottons and gauze balls
It is convenient to take care of the mouse with gauze balls or cotton balls. They are impregnated with an alcohol solution and the surface is wiped.
Wet wipes
Special alcohol-based wet wipes will help you properly care for the mouse's body. Common wet wipes contain chemicals that can harm your equipment:
- Miraclean viscose-based universal wet wipes are suitable for cleaning the entire surface of the computer. The composition has antistatic properties. It has a pleasant smell.
- BURO BU-Z wet wipesnon-woven fabric surface. They are based on viscose and polyesters.Impregnation of towels protects the surface from dirt for a long time, as it has an antistatic property.
Towels should have a smooth, soft texture. There should be no long hairs.
Special liquids
Computer cleaners can remove dirt quickly. Most solutions contain components that not only clean, but also disinfect the surface:
- Defender CLN gently cleans the surface without damaging it. The composition does not contain any abrasive components.
- ProfiLine Screen Clean Spray helps to keep office equipment clean. The product is sprayed on a dirty surface, then wiped off with a towel. The tool easily solves greasy stains, old marks and stains.
Ethyl alcohol or "Chlorhexidine" alcohol solution
For better cleaning of the mouse surface and for its disinfection, ethyl alcohol is used. Chlorhexidine solution has a milder effect. A small amount of the solution is applied to a napkin and the surface is wiped.
Phillips screwdriver
If a lot of dirt has accumulated and you need to disassemble the device, you can not do without a Phillips screwdriver. Using a screwdriver, it is easy to open the upper part of the manipulator.
Small plastic scraper
Removing stubborn and persistent dirt takes a lot of effort. A plastic scraper comes to the rescue. Its dimensions are small, so dirt of any complexity can be easily removed with its help.
Soft dry wipes
After all the procedures, you need to wipe the device dry. It is better to use special soft dry wipes.
Lens or magnifying glass
Use a magnifying glass or magnifying glass to achieve maximum cleanliness.With the help of these objects it will be possible to distinguish all the dirt particles.
How to clean the case at home
If the cleaning is supposed to be carried out without dismantling the equipment, the work includes the following steps:
- the device is disconnected from the computer (the sensor is turned off or the wire is removed);
- then wipe the wire and connector plug with a damp cloth;
- then a dry cleaning is carried out using a vacuum cleaner (a flexible nozzle is pressed on the surface and the holes of the mouse);
- use sticks to clean the holes;
- at the last stage, the device is wiped with wipes containing alcohol.
How to properly disassemble a computer mouse
The best way to clean dirt from the mouse is if it is foldable.
In this case, perform the following sequential actions:
- disconnect the mouse from the computer;
- the socket and the thread are cleaned with a cotton swab moistened with an agent containing alcohol;
- then a special mat is prepared on which the mouse will be disassembled;
- the device is turned over and with the help of a Phillips screwdriver the deepest screw is unscrewed;
- the body is separated into two parts;
- remove the microcircuit, ball or laser sensor;
- take a scraper and clean the old dirt;
- wipe off the remnants of dirt with soft wet wipes;
- all parts are carefully dried;
- at the last stage, it remains only to assemble the structure.
How to wash the interior
If after cleaning the case the system does not work better, you need to clean the inside of the device.
- After the case is removed, you need to carefully remove the microcircuit and gently wipe it with a cotton swab.
- Soak a cotton ball in alcohol and wipe the inside surface of the mouse.
- Then they take out the wheel and wipe it from all sides. You can soak the part in warm water with the addition of alcohol. The place where the wheel is attached should also be wiped clean.
- Wipe all sensors with a cotton swab. Particular attention is paid to the places where the buttons are located.
- It is only after all these actions that the parts are put back in their place and the body is assembled.
Cleaning characteristics of different models
There are several types of equipment for transmitting information. Each of them requires a careful attitude and special care requirements.
With a ball
In the modern computer market, this type of mouse is extremely rare. Maintenance is difficult as dirt and dust collect on one side of the roller. To avoid contamination, you should periodically wipe down the mat and wheel. Do not touch equipment with dirty hands.
Before starting work, it is recommended to wipe your hands with alcohol-based products.
The best way to clean a mouse with a ball is to take it apart. First, the dirt is removed with a scraper, then wiped with a napkin soaked in alcohol. It is undesirable to use special solutions, as they can damage the device.
The cleaning action of the ball mouse is as follows:
- turn off the computer, disconnect the mouse from the port;
- the device is upside down;
- use a Phillips screwdriver to unscrew the screws;
- remove the plastic casing;
- carefully remove the rubber ball and wipe it with warm soapy water, after which it is treated with an alcohol-containing agent;
- the inside of the mouse is wiped with wet wipes;
- the clamping device is cleaned, with the help of which the ball is fixed and contact with the mat is ensured;
- wipe the button contacts;
- at the end of the work, the structure is assembled as planned.
Optical
It is easy to clean the upper part of the optical mouse case:
- Initially, the mouse is disconnected from the computer.
- Paws, which have a special sensitivity, are responsible for the good work of such a mouse. These parts of the equipment are wiped with cotton swabs dipped in an alcohol solution.
- Dust and dirt from all cracks are cleaned with toothpicks.
- Rub the mouse's eye with a cotton swab, trying not to press the surface.
- Then use toothpicks to clean the spaces between the keys and the wheel.
- At the last stage, it remains only to wipe the entire body of the mouse with wet wipes.
It is recommended to perform this cleaning once a month. In the event of heavy soiling, it is advisable to also clean the interior:
- Work begins by disconnecting the mouse from the computer.
- Wipe the body with a damp cloth.
- The equipment is turned over and the screws are unscrewed.
- All parts must be folded on a special mat so that nothing gets lost.
- Disconnect the halves of the case, remove the microcircuit and remove dust.
- Wipe the optical sensor with a cotton swab.
- Wipe the wheel with a cotton ball soaked in an alcohol solution.
- All parts are assembled and screwed together.
Laser
Cleaning a laser mouse is very simple:
- first disassemble the case;
- remove the microcircuit;
- use a cotton swab to wipe the laser sensor;
- then wipe the inside with a soft, damp cloth;
- at the last stage, it remains only to assemble the device again.
If the cursor itself periodically disappears from the computer screen, and the lens has ceased to shine red light, you need to clean the laser separately. The progress of the work is as follows:
- the mouse is returned;
- take a toothpick and gently run along the edges of the laser;
- after that, the edges are wiped with a cotton swab moistened with an alcohol solution.
Trackball and induction mouse
Sophisticated trackball construction. It is best for a specialist to dismantle this type of equipment. To avoid heavy contamination, the housing surface should be wiped regularly with alcohol wipes.
To clean the induction mouse, first remove the keyer. Then the entire surface is cleaned with cotton swabs dipped in an alcohol solution.
Wireless
The wireless manipulator has a more fragile design, so all actions are performed with special care. During cleaning, pay special attention to the Bluetooth sensor. When this sensor gets dirty, information is exchanged slowly, the connection with the computer is lost, and the working distance is reduced.
What you should not do
When taking care of a computer mouse, you should remember some important points:
- Don't use too much liquid. Wipe only with a slightly damp cloth. Excessive alcohol solution will oxidize the surface. As a result, the equipment will malfunction.
- Avoid getting water and dust on the microcircuit.
- During the cleaning process, do not use sharp objects. They can damage the surface and damage the mechanism.
- After disconnecting the mouse from the computer, you need to wait a few minutes.
- It is advisable to use special alcohol-containing solutions designed specifically for a computer.Ordinary alcohol leaves streaks and can damage the mechanism.
- It is not recommended to use fabric with long or hard pile.
- All actions are carried out without the use of force.
Rules of maintenance and operation
In order to avoid heavy contamination that could damage the device, a number of recommendations should be followed:
- it is advisable to carry out a general cleaning 4 times a year;
- simultaneously clean the surface of the table and carpet;
- it is desirable to use tools and materials specially designed for the maintenance of computer equipment;
- if liquid solutions are used, the dosage must be respected;
- before starting any work, you need to wash your hands or wipe them with alcohol;
- do not eat or drink near the computer;
- dirt and stains should be removed immediately, before they are eaten and dried.
If you follow all these simple recommendations, the system will work for a long time, without interruptions.