How to wash a bath at home, a description of medicines and folk remedies
Any bathtub, in the absence of regular cleaning, begins to darken over time, various contaminants accumulate on its surface. The material of each bath requires an individual approach, and the choice of detergent depends on the nature of the pollution. Good housewives must know how to wash the bath correctly and quickly using the products available, and what type of maintenance is necessary for the different surfaces.
Reasons for contamination
Many factors can cause contamination of the bath surface: poor water quality, soap deposits, corrosion of the metal layer, rusting of old pipes, darkening of the enamel due to aging, damage due to aggressive care . Each type of surface requires an individual approach and the selection of suitable products.
Single plate
The most common type of contamination is organic plaque.There are dead cells carried away from the human body, as well as sebum. This biological mixture is deposited in the form of a film on the walls and is washed off with a sponge and soap.
Limestone
Lime on the walls of the bath comes from water of increased hardness, which contains a large amount of minerals. This water in Russia flows from taps in most regions. The calcium-magnesium mixture accumulates on the enamel and forms unpleasant stains and spots.
Detergent deposits
The detergent foam mixes with organic dirt and deposits on the tub walls. Such a plate is mostly gray in color and is capable of eating away deep layers of material.
Rust
Rusty deposits are traces of iron oxidation resulting from leaking pipes due to old age or due to standing water. Such contamination is difficult to wash away.
Yellow on the enamel
Over time, any surface of the tub will yellow from exposure to water. Chlorine impurities and chemical residues form a dense film, eating away at the enamel layers. To avoid this unpleasant effect, the bath should be carefully cleaned regularly.
old enamel
Every type of bathroom coating fades, becomes covered with scratches and chips, in which dirt feeds. In this case, it will be difficult to whiten and polish the surface.
Other
The bathroom is used not only for washing the body, but also for other procedures: washing shoes, animals, treating cuts, etc. You can remove traces of colored shampoos, foam, brilliant green, potassium permanganate with the help of folk and chemical agents. It is important to consider the type of material, as many cleaning products are not suitable for acrylic tubs.
What will happen if you don't wash
If you do not take good care of the surface of the bathtub, the dirt will penetrate into the deep layers and it will not be possible to clean the material after a while. The problem of accumulated old dirt can only be solved by replacing the bath.
Basic cleaning methods
On the shelves of stores you can find universal products for any surface of the bath, but they are not able to cope with all types of dirt. For each type of bathroom plate and material, it is necessary to select individual components.
Using Home Remedies
Folk remedies from improvised ingredients available in every household can cope with pollution no worse than purchased chemicals. Homemade recipes have several characteristics:
- are blended from natural ingredients;
- have a low cost;
- are available in every home or available for purchase at a grocery store;
- does not cause allergic reactions;
- easy to use.
For a regular bath, it is enough to use a substance from home supplies, but to remove difficult stains, you need to know in what proportions and what products you need to mix.
The vinegar
To clean cast iron bathtubs, it is enough to have 9% table vinegar on the farm. It is necessary to cover the surface of the enamel with a layer of vinegar using a cloth, leave for 8-10 hours and rinse everything under a shower.
Ammonia
A yellow bloom will help remove a mixture of ammonia and soda:
- take 1 tablespoon of each substance;
- mix well;
- apply the mixture to the pollution site;
- leave for 30 minutes for better action;
- wash with water.
If the stain has not completely disappeared after the initial treatment, it is recommended to repeat the procedure.
salt and water
The tandem of plain water with table salt will help remove rust stains, limescale and other serious contaminants. For cleaning, it is necessary to mix 2 tablespoons of salt and a little water in a porridge state (until porridge is formed); to enhance the effect, you can add a teaspoon of wine vinegar. Then you need to heat the mixture over low heat for 1-2 minutes. Apply the product obtained on the surface of the bath and leave to act for 30 minutes, it is not necessary to rub the surface of the bath. After the time has elapsed, rinse the mixture off with lukewarm water.
Hydrochloric acid
Yellowing of the surface of the bath is well removed by a hydrochloric acid agent. Dilute 3 tablespoons of the substance in 1 liter of water, carefully wipe with the solution all the walls of the bathroom, rinse with warm water after 20 minutes. If there are old stains that are difficult to remove, it is recommended to generously fill them with a product and leave for 1 hour.
lemon acid
Citric acid effectively whitens bathroom enamel, but is not recommended for use on an acrylic surface as it can damage the protective coating. For a cleaning procedure, you need to dilute 1 sachet of acid in 250 milliliters of warm water. Treat yellowed areas with a solution and leave for a few minutes. This can also be used to clean light colored tiles and grout in joints.
Hydrogen peroxide
Good old peroxide, found in every medicine cabinet, has lightening properties that are recommended for whitening bath enamel. Such a product is completely environmentally friendly, does not cause allergic reactions.
To wash the walls in the bathroom using hydrogen peroxide, you need to perform the following algorithm:
- in 100 milliliters of peroxide, it is necessary to add 50 milliliters of ammonia;
- warm up the bathroom with a hot shower;
- then apply a cleaning mixture to a warm surface;
- soak for 25 minutes;
- wash with water.
In the presence of old stains, it is recommended to clean it mechanically with a soft sponge soaked in a solution of peroxide and ammonia.
Turpentine
To whiten yellow enamel, you can mix turpentine, salt and water. Turpentine and salt are mixed in equal proportions and slightly diluted with water so that the agent is not too aggressive. Apply the resulting gruel to the yellowed surface and leave for 3-4 hours, then rinse.
This method can defeat even the toughest stains, but it cannot be used to clean acrylic bathtubs.
Solvent
Solvents such as turpentine or white spirit can remove greasy stains, dyes, silicone compounds. It is necessary to apply the solvent in spots, processing only the places of contamination. This product can damage any enamel. After using these products, it is recommended to wash the bathroom with ordinary detergent.
Folk remedies
Traditional cleaning methods require longer processing time. To obtain a positive result, some mixtures must be stored for more than 5 hours.
Salt and vinegar
Vinegar itself is resistant to various contaminants, but for cast iron baths it is recommended to add calibrated salt to it in order to achieve an abrasive effect.To mix the cleaning agent, you need to slightly warm the vinegar (3-4 tablespoons) and add salt to it in the amount of 3: 1, stir until a boiled state and clean the stains with a mixture , by dots. This method is not suitable for steel and acrylic surfaces.
Borax and ammonia
Ammonia should be mixed with borax at a 1:1 ratio, left on the dirt for up to 20 minutes and rinsed off.
acrylic vinegar
To whiten the bathroom, it is recommended to take 10% table vinegar. Then you need to fill the bath to the top with warm water and add 2 liters of vinegar to it, mix the water and leave for 8 hours. Then drain the liquid and rinse the walls with water from the shower. This method is suitable for removing yellowness and scale.
Household chemicals
You can get rid of yellow stains on bathtub walls using household chemicals. Detergents in assortment are presented in stores, in different price categories and forms. You can clean ordinary dirt with ordinary dishwashing gel:
- lather the product with water on a sponge;
- apply to the entire surface of the bath;
- to clean particularly dirty areas with a soft sponge.
To remove small dirt deposits, simple products are sufficient, it is not necessary to use aggressive substances.
coffee
Cif spray is designed for the treatment of acrylic surfaces; gentle substances that make up the composition do not damage the protective layer of the polymer material and effectively remove non-old stains. The product resists limescale well, dissolves organic soils and the accumulation of soapy deposits.
For cleaning, simply spray Cif on very dirty areas, leave on for 10 minutes, wipe the surface with soft materials.Then rinse everything off with lukewarm water.
Comet
Comet is only intended for bath disinfection. According to the responses, the product is not resistant to old stains and has a high price. The advantage of this product is the ability to form an antibacterial film on the wall surface after cleaning. Recommended for preventive and regular cleaning.
Domestos
Domestos is a very aggressive agent that can burn any enamel. Recommended for use on heavy dirt, old rust. Apply with a sponge only to the damaged area, do not leave for a long time.
Pemolux
Pemolux contains soda, which whitens enamel well. The product is available in powder form and effectively removes stains. To remove old dirt, it is recommended to apply the powder to the stain, fill it with water until a slurry forms and leave for 10-15 minutes.
Sun corner
San Wedge is a company that produces chemicals for cleaning kitchens, tiles, bathrooms, plumbing. According to the answers, all types of tools quickly cope with the tasks. Effectively removes soap stains, shines plumbing, has an antifungal effect.
Triton
Triton is available in the form of a spray. The substance dissolves organic deposits and oily stains and is designed to combat limescale. Leaves a pleasant aroma of cleanliness and shine on the surface.
mr chister
Mr. Chister is an easy to use spray for cleaning acrylic tubs. Can be used for the treatment of tiles and shower enclosures. It has an antifungal effect.
whiten
You can use commercial products or homemade recipes to achieve the whitening effect on the tub walls.It is important to consider the type of surface so as not to damage the upper protective layer of the walls.
enamelled
This type of surface cannot be washed with very hot water, since the enamel may not withstand a sharp drop in temperature, microscopic cracks may appear on the protective layer, into which particles of dirt will fall. Do not scrub these surfaces with metallic sponges and sandpaper.
Laundry soap and ammonia
To remove dirt on the enamel, a homemade recipe from a mixture of ammonia, soda and laundry soap is suitable. Mix the soap crumbs in a glass of warm water and add 1 teaspoon of baking soda and 1 teaspoon of ammonia.
Today, not everyone has laundry soap at home; only housewives of the old Soviet school use it. But on the shelves of modern household stores you can find ordinary, good-natured soap at an affordable price (10-15 rubles for a large piece).
lemon acid
A citric acid solution effectively removes various impurities without damaging the enamel. For cleaning you will need:
- the acid pack dissolves in a small amount of warm water;
- apply with a damp cloth to the walls of the bath;
- leave half an hour;
- wipe the entire bath thoroughly and rinse.
One procedure is enough to whiten the enamel.
Plumbing detergents
Household chemicals used to treat stoves, kitchen appliances and tiles can be used to clean the bathroom. For this purpose, products in the form of a cream or gel are suitable. Powder options cannot be used on all surfaces, which is important to consider before the procedure.
Baking soda
Cleaning with baking soda whitens enamel baths well, for this you need to pour the powder on the dirt and pour water on it. Leave the formed soda slurry to act for several hours.
Acrylic
Acrylic tub surfaces are made from polymeric materials that are not resistant to harsh, powdery dry agents. This coating itself is very soft and easily damaged. To maintain this material, it is necessary to select soft fabrics and environmentally friendly household cleaning products.
Exclude products with an aggressive composition from everyday life. Of the homemade recipes, you need to choose the most gentle.
Lemon juice or acid
Lemon juice or citric acid solution can help remove stubborn stains from an acrylic tub without damaging the protective topcoat.
The vinegar
9% vinegar effectively removes old stains and rust. It can be used to clean a polymer bath, you can let the vinegar act on the surface of the walls for 20-30 minutes.
Melting
The walls of the cast iron baths are covered with white enamel. Such a surface is the most resistant to aggressive detergents, but does not tolerate sudden temperature changes. It is not recommended to rub the enamel with metal sponges, since after several such procedures the enamel layer may become thinner.
Cleaning powders
You can whiten the surface of a cast iron tub with laundry cleaning powders. It is enough to pour the product into the bathroom, dilute it with water, rub in all problem areas and wash off the oatmeal with dirt with warm water. The main thing is not to overdo it with the amount of powder, as it will be problematic to wash it off later due to the rapid formation of foam.
A soda
Baking soda has a whitening effect and can help remove rusty and yellow stains. Can be used to clean enameled walls. It is recommended to mix equal parts baking soda and bleach.
Ammonia
Ammonia can be used pure to remove stains from enamel, but it can also be mixed with lye, soda and salt. Handles yellow streaks and rust on its own. Do not leave on for more than 10 minutes.
Bleach
Bleach can remove dark deposits from the steel tub. Apply the liquid to the dirt, leave on for 25 minutes and rinse with water.
How to remove limescale
Limescale forms gray and yellow stains on the bathroom surface. The mineral deposits are firmly embedded in the enamel. Folk remedies will help to cope with such pollution.
Borax and vinegar
Borax lightens yellow spots well. A mixture of lemon juice with this product will help remove even old dirt:
- mix lemon juice with chestnut to form a paste;
- apply to the stain;
- let dry completely;
- wash with water.
Such a tool is able to remove rust stains on the first try.
Salt and vinegar heated
It is recommended to mix 100 ml of warm 9% table vinegar and half a glass of baking soda powder. Clean the bathroom with a regular sponge and rinse off the solution.
Salt and turpentine
A mixture of turpentine and table salt removes rust stains and limescale. For cleaning, it is necessary to moisten the walls of the bathroom with water, apply a thin layer of salt on top, moisten a sponge with turpentine and rub the surface of the bathroom.Wash salt and turpentine from the walls, then you need to wash the bathroom with ordinary detergents.
How to remove rust
Rust streaks are the most stubborn stains possible. Household chemicals cope with this task only 3-5 times. In folk recipes there are several ways to solve this problem.
Salmon and hydrogen peroxide
Use hydrogen peroxide to remove rust from any surface. Just add 200 milliliters of ammonia to 100 milliliters of peroxide, shake the mixture, and apply it to the rust. Leave on for 20 minutes then rinse. If the stain does not disappear the first time, you can repeat the procedure.
The vinegar
If you don't have anything else on hand, you can clean rust stains from enamel with natural apple cider vinegar. On the most contaminated areas, it is necessary to pour vinegar or put a cloth soaked for several hours, then wash the bathroom with an ordinary product and rinse.
Mustard powder
Mustard not only effectively removes stains, but also has an antibacterial effect. For the cleaning procedure, you need to mix it with soda in the proportions: 15 grams of mustard + 15 grams of soda powder + 20 grams of grated soap. Pour everything with ammonia (2 tablespoons), mix. Then clean the bathroom with this solution and rinse the remnants with water.
Use soda
Soda lightens well, dissolves organic plaque and resists stubborn stains. Cleaning with soda powder: you need to mix the powder with water until a slurry state, rub the surface of the bath, leave for a few minutes and rinse with water. Polymer surfaces cannot be cleaned with this method.
Clean bath from Sanox
Sanox bath gels not only remove rust and other enamel contaminants, but also have an antibacterial effect. Household chemicals of this brand perfume the apartment, clean the surface of the bathtub to make it shine and kill germs.
Ultra white by Cif
The Gif brand produces a wide range of cleaning products, including creams, gels and sprays for cleaning the bathroom surface. Mild products effectively deal with dirt, smell good and do not damage enamel. With old and stubborn stains, these products can only last a few times.
eyelash bang
Cillit Bang is a universal product. Available for purchase in two forms: gel and spray. Suitable for cleaning plastic and enamelled materials. Gently cleans rust stains, but does not show well when cleaning the bath with a layer of lime.
Mister Muscle
Mister Muscle produces various detergents. In order to remove old dirt and rust, you need to use a 5-in-1 formula. The liquid is suitable for any type of bath, since there are no abrasive and aggressive substances in the composition.
Santik
Santik is not a popular budget remedy, produced in the form of a spray. Santik has positive reviews, removes a greasy and organic layer, is able to defeat heavy pollution.