TOP 7 means you can wash cement from plastic windows
During construction work, cement may deposit on plastic windows. Once the dirt dries, it is difficult to clean the surface. In such a situation, it is important to know how to wash off the cement from the plastic windows so as not to damage them. It is possible, but you have to act with caution and respect the rules.
Basic methods
In the process of work, it should be borne in mind that scratches may remain on the glass or plastic window frame when cleaning the cement. Therefore, it is necessary to act with caution. It is necessary to use gentle products that do not harm.
Special means
There are very effective specialty products that can be used to remove cement. The most popular are described below.
Atlas szop
It is used as follows:
- Atlas Szop is sprayed on contaminated areas.
- The composition contains a caustic alkali. After application, wait for the time indicated in the instructions for use.
- Then the applied composition, as well as cement dust, is carefully wiped off with a rag.
- After that, you can polish the glass using special tools. For that, Mister Muscle, Cilit Bang will do the trick.
Cement N concrete stripper
To use it, you need to follow the steps:
- The greatest contamination should be removed first.
- Cement N Concrete Remover is carefully applied to the surface using a sponge.
- You must wait at least 30 minutes. If the degree of cement contamination is high, this time can be increased.
- The remaining dirt is washed off with a damp cloth.
If the degree of contamination is high, the cleaning will have to be repeated again.
Organic pickling
This agent does not damage sensitive surfaces during cleaning. Its use does not harm either humans or the environment.
It is applied to a plastic window and waits for the cement to dissolve. After that, rinse off the residue with water. Bio Decap is based on organic materials.
Blitz
To use it, simply apply a cleaning cream to the plastic window. After that, it is enough to rub it a little and rinse - the glass will become clean. After that, it is recommended to rub well with a microfiber cloth in order to polish the glass.
frost comet
This tool is applied to the contaminated surface with a rag. Then you have to wait for it to start working and wipe off the cement stains. Then the surface is washed and polished by wiping with a dry cloth.
Acetic acid
To use this tool to clean concrete that has fallen on glass, you need to do the following:
- Wipe the window with a cloth soaked in acetic acid.
- The soda is poured onto another cloth. Within 30 minutes they wipe the dirt from the cement.
- The remaining traces are removed with a damp cloth. Use a plastic scraper if necessary.
Then wipe with a clean cloth and buff so that no streaks remain.
Lemon
This method is most effective when only small spots of cement are present on the glass.
To clean with lemon, do the following:
- You need to cut it into two halves.
- Rub all the dirt with lemon.
- Wait for the cement to soften.
- Wipe the glass with a damp cloth, then buff with a dry cloth.
What you should not do
Consider the following:
- Do not use aggressive detergents.
- It is not recommended to apply to the rubber parts of a plastic window - this can lead to their destruction.
- Before using it, it is important to study the composition and make sure that the products used will not damage glass or plastic.
How to remove construction dust
Windows may be stained with construction dust. It does not look like a homemade product and is more difficult to clean.
If during the repair work there was a protective film on the windows, then in this case it is removed along with all the dirt that has settled on it and thrown away.
If this has not been done, you must do the following:
- Use an appropriate cleaning product. You can use one of those used to clean plastic windows from cement.
- Wait 10 minutes or more for the dust to soften and be easily removed with a cloth.
- Thoroughly and thoroughly clean the surface of plastic windows.
- If any dirt remains after that, you can use a plastic scraper, but it should be used in a way that doesn't leave scratches on the glass.
Tips & Tricks
To clean the glass, it is best to use a foaming detergent. In this case, the foam penetrates the dust particles, destroying them. After you finish cleaning the cement, you should polish the cleaned surface with a soft, dry cloth.If any previously unnoticed contamination remains, they can now be removed. Do not use metal objects when cleaning - they will scratch plastic and glass.
If scratches appear, they can sometimes be masked by polishing the surface.