TOP 20 remedies to quickly clean rust in the toilet at home
Rust stains on the toilet are a fairly common problem faced by almost all owners of this plumbing. And often the reason for this phenomenon lies in poor water quality and the condition of the sewage system. Therefore, it is important for owners of cleanliness to know how to remove rust from the toilet and how to avoid the appearance of an unpleasant yellow plaque.
Preparation for cleaning
Before you start cleaning the toilet with various means, it is extremely important to arm yourself with protective equipment: you will need rubber gloves and, in some cases, a respirator. It is then recommended to open the windows and doors of the bathroom in advance for ventilation.
How to remove at home
Today, household chemical stores can offer quite a large number of different cleaning agents that differ in consistency and composition.
Typically, abrasive scouring powders are used, which are cheap and easy to remove plaque.However, liquid products in the form of gels are more effective. The possibility of cleaning the toilet using traditional methods is also not excluded.
Abrasive powders
Cleaning powders contain fine particles that quickly remove rust stains, but using them can damage the surface of your bathroom fixtures.
Sanita
It is an indispensable tool for cleaning toilet rust. Just apply the powder on the dirt, wait 20 minutes. The product should turn into a thick foam. Then it remains only to wipe with a brush and rinse with water.
Comet
The best cleaning powder for removing old rust deposits from the surface of the tank. The product has disinfectant properties, has several aromas. Instructions for use: Apply to a damp surface, leave to act for 10 minutes, rub with a brush and rinse.
Sarma
This cleaning agent has long established itself as a reliable and effective aid in the fight against rust deposits. The abrasive powder removes impurities and preserves the whiteness of sanitary ware for a long time. How to use: apply Sarma to the surface, wait 15 minutes, rub intensely with a brush and rinse. After application, the product does not leave traces and also kills a significant part of bacteria.
Pemolux
The tool helps to quickly remove stains and rust stains. Despite the abrasive particles, it gently cleans the surface of the toilet bowl and does not contain aggressive impurities.
Does not have a strong smell. Application: apply a small amount of powder to problem areas, wait half an hour, wipe with a brush and rinse. It is ineffective in the fight against stubborn stains.
Got out
This product contains natural ingredients and small turquoise granules. Gently cleans the surface of sanitary ware, as the composition contains abrasive and active components. Method of application: apply powder to the problem area, clean with a brush. For disinfection, leave on for 5 minutes and rinse.
Liquid and gel products
Liquid household chemicals for toilets are considered milder because they do not harm plumbing enamel.
Domestos
The gel contains chlorine and active chemical components that help clean the toilet bowl quickly. To get rid of limescale, apply the product under the edge of the bowl, leave for an hour and rinse. It is recommended to repeat the procedure after 5 days.
Dosia
Even old rust stains can be removed with disinfectant gel. The product should be applied to problem areas, wait for the formation of a thick foam, wipe with a brush and rinse with water.
Sarma Freeze
A versatile gel that provides lasting cleanliness, shine and pleasant freshness. How to use: Apply a small amount of gel to stains, brush away rust, and rinse. Leave the product on for an hour to remove the plaque at the bottom.
Duck in vinaigrette
The well-known cleaning agent effectively treats any degree of pollution and also eliminates most bacteria and germs. For cleaning, the agent is applied to the surface of the plumbing, then the plate should be brushed with a stiff brush and washed. For stubborn stains, let the gel act for 10 minutes.
eyelash bang
A thick liquid gel removes limescale and traces of rust from toilets.Application: Apply the cleanser directly to the problem area, wait five minutes, wipe with a brush and rinse with water. Be sure to use gloves.
Comet
The tool thoroughly disinfects and cleans the plaque. The gel is applied evenly under the rim, left in place for 15 minutes, then the water is drained. Do not mix with other cleaning products.
Folk remedies
You can also remove rusty plate using improvised means that are always present in any house.
The vinegar
You can remove rust deposits with regular table vinegar. To do this, a piece of cloth is moistened in liquid and applied to the problem area. After half an hour you need to wash off the water.
Citric acid
With citric acid, you can quickly remove the yellow streak, but you won't be able to remove old, stubborn stains. Apply a sufficient amount of acid to a sponge or cloth, carefully wipe off the dirt and leave for one and a half hours. Then it remains only to rinse.
Hydrogen peroxide
A solution (1: 5) should be prepared from hydrogen peroxide and ammonia. Then the mixture is applied to the contaminated areas and left for half an hour. After the expiration of time, you need to carefully wipe with a brush and rinse.
oxalic acid
You need to pour acid on the surface, carefully rub the yellow stain and leave for ten minutes. Then it remains only to rinse. In case of severe contamination, it is recommended to add hydrochloric acid, wipe with a brush and leave for half an hour. However, the method is not suitable for plastic pipes.
Baking soda
This whitening product will safely clean your plumbing fixtures. You need to mix the powder with water or hydrogen peroxide, apply to the rust and leave for an hour.
Soft drinks
Pour a liter of sweet soda (Coca-Cola) over the problem area. Apply a cloth to hard-to-reach places. After an hour, rinse the water.
Toothpaste
Toothpaste can not only remove rust stains, but also whiten plumbing. Using an old brush, you need to rub the paste into the dirt and rinse after half an hour.
white
Whitener and other chlorine products should only be used if the hood is running. Pollution is filled with whiteness and left overnight. In the morning, just wipe it with a brush and rinse with water.
Causes of appearance and prevention
The causes of rust formation are many: poor quality water, obsolete pipes, leaking water from the tank and roughness of the walls of the toilet bowl.
The preventive measures to avoid the appearance of rust deposits are as follows:
- It is imperative to eliminate leaks from the tank, if any.
- Once a week, clean the toilet with a cleaning agent and bleach.
- Clean with Silit at least once a month.
- Buy special tablets that are attached to the toilet or placed in a cistern.
- Clean the tank periodically with whitener or vinegar.
It is recommended to give preference to porcelain toilets, since the structure of earthenware is too porous and therefore more susceptible to the formation of rust.