TOP 15 methods to wash a bathroom curtain at home
Bath curtains get dirty over time, which becomes noticeable, regardless of the type of material. Keeping the bathroom clean also applies to curtains. This is necessary both for the aesthetic appearance of the premises and for the health of people. How to wash your bathroom curtain is a burning question for every housewife. The product, freed from stains, returns to its original appearance, being an element of the decor of the sanitary block.
Reasons for the appearance of contamination
The purpose of the curtains is to protect the floor, walls, plumbing fixtures in the bathroom from water during ablution. The reasons for the appearance of dirt on the curtains are associated with water and ventilation of the room.
Yellow color
Yellow stains on the curtains appear if the detergent is not rinsed inside after taking a bath or shower.
White spots
When you take a shower, water droplets fall on the curtains. Clean but hard, dry water forms limestone on all types of surfaces.
Rust
The presence of rust in tap water is noticeable by brown dried drops and streaks on the curtains.
Mold
Insufficient ventilation of the room prevents the curtains from drying out, which leads to the formation of mold.
Choice of funds
The choice of cleaning materials depends on the type of material from which the curtains are made.
Domestos
The main component of the gel is chlorine. The widespread use of the product is explained by its versatility: for all coatings (except polyethylene, upholstery), all types of stains. To clean the curtain, it is enough to use a concentration of 1 capful for 5 liters of water (up to 40 degrees).
Disappear
To clean textile curtains, you can use an oxygen bleach stain remover. It can be used to remove rust, soap scum.
Sanita
The purpose of the gel is to remove rust from metal, ceramic and terracotta products. The active ingredient is oxalic acid. Use undiluted to remove traces of rust.
Comet
The gel can be used to remove rust, limescale and disinfect against fungus. The cleaning agent contains: chlorinol, formic acid, phosphoric acid.
Pemolux
To clean the curtains from white streaks, it is convenient to use a product in the form of Sea Breeze cream or Citrus liquid. The cleaning agent is based on soda.
ace
Bleach contains chlorine.They are used for washing by hand and in an automatic machine, at a water temperature not exceeding 40 degrees.
Adrian
The detergent comes with a spray nozzle, which makes it easy to clean the surface of the curtains. The manufacturer's instructions indicate the effectiveness deoxidizer... The active ingredients are fruit acids and anionic surfactants.
Cleaning methods
How to clean the curtains depends on the type of material of the protective and decorative element, the nature of stains.
There is an automatic machine in the washing machine
Products made of textiles, vinyl, a combination of cotton and PVC can be machine washed. Textile bath curtains are made from 100% cotton with a water-repellent impregnating and weighting agent to maintain their shape. They can only be cleaned properly by washing. The product is placed in the device without holding devices on the stem. The water temperature should match the manufacturer's instructions (usually no more than 60 degrees).
To protect the curtains from mechanical stress, you must:
- set delicate mode;
- disable rotation;
- drying.
Vinyl, textile-vinyl chloride curtains are washed in the same way with a towel, for better contact with the detergent. If the rings are not supposed to be removed, the products are washed in a pillowcase to prevent damage to the drum.
As a detergent, washing powder is used for automatic machines. In the presence of rust stains, lime deposits on the surface of the curtains for textiles, add a little Domestos, for others - soda.
Hand washing
Polyethylene products are cleaned manually. The manual method is acceptable for polyester and vinyl products.In case of slight contamination with soap stains, the curtains are not removed from the bar, they are treated with a sponge.
Cleaning sequence:
- straighten the inside of the curtain above the bathroom;
- moisten from the shower with warm water;
- holding from the outside with your palm, wipe the surface with a soapy sponge;
- wash off with a stream of clean water from the shower;
- move on to the next curtain segment.
At the end of the procedure, shake off the drops of water above the tub from the curtain and wipe with an absorbent cloth.
In case of strong dirt, the curtains are washed with preliminary soaking in a container with warm water. The choice of a cleaning agent depends on the nature of the dirt: black mold stains, mildew, soap, limescale stains. After 20-40 minutes, the bathroom decor element is wiped with a soapy sponge, cleaning off existing stains.
Rinsing should be done in a tub with a sufficient amount of lukewarm water. To create a protective film on the curtain against fungus and mold, you can soak the curtain in a basin of cold salt water for a few minutes.
Partiel
Once a week, the curtains are cleaned from dirt without removing them or completely wetting them. Only contaminated areas are treated. This method of care allows you to avoid the loss of decorative surface, extend the life of the product.
Features to remove various stains
Each pollution has its own chemical components. For destruction and removal use mono-remedies designed specifically for such stains, or a wide range.
Rust
Brown-brown marks on textiles and vinyl can be washed off with household cleaning gels, where rust removal is indicated.On PVC, polyethylene, a mixture of ammonia and hydrogen peroxide is used. The solution is prepared at the rate of 3 parts of ammonia water and 1 part of peroxide.
The sponge is moistened with the selected agent and the dirt is wiped off. After 5 to 10 minutes, remove the cleaning agent as well as the dirt. Wash area with clean water, wipe dry.
fungus and mold
Mold mycelium penetrates deep into the structure of textiles, vinyl curtains, but it is easier to wash off smooth surfaces. Products are treated with a soda-vinegar mixture.
Procedure:
- remove the curtain;
- put in a basin;
- hydrate;
- sprinkle soda on the stains;
- wipe with a soft brush;
- add warm water;
- pour the vinegar;
- rinse in the resulting solution;
- wash with clean water;
- shake off the water;
- dry.
You can use stain removers, bleaches from mold on cotton products, if not prohibited in the instructions.
Limestone
Limescale deposits are poorly soluble chemical compounds. To eliminate them, use special household chemicals. Instructions for use indicate metal, ceramic, glass surfaces. Plaque is removed by chemical and mechanical action.
On the curtains, intense efforts will lead to the destruction of the coloring layer. The products are slightly moistened with water. A cleaning gel or powder is applied to the stains. Resist as instructed. Gently rub the stains with a clean sponge.
Folk remedies
Home remedies are used once a month. Household chemicals are used against stubborn stains.
A soda
Baking soda will help remove rust and mildew at a 1:3 solution concentration (soda:hot water). The solution can be used for all types of washing: machine, hand, partial.
Mixture of baking soda, vinegar and pine oil
A mixture of baking soda, vinegar and pine oil is added at the end of the machine wash during rinsing.
The ratio of substances to 120 milliliters of water:
- vinegar - 50 milliliters;
- soda - 25 milliliters;
- essential oil - 120 milliliters.
Processing with a similar composition gives the product an aroma, protects against mold.
Vinegar white
A mixture of Whiteness and acetic acid (ratio 1: 2) allows you to clean products from dirty spots, rust, mold, which can be treated with chlorine.
milk with salt
If you mix 1.5 cups of milk and 1 tablespoon of salt, the resulting solution can be used to clean the surface of the yellow plaque. The cloth is soaked for 1 hour. Wipe with a soft brush. Rinse in the shower.
Lemon juice
Lemon juice eats away mold and rust stains well. The treatment solution is prepared from 1 liter of hot water and the juice of 5 lemons. Wipe the dirty areas with a sponge soaked in acidified water and leave for half an hour. Finish by hand washing with dish detergent. The product is rinsed, shaken, dried.
How to Wash Different Curtain Materials
Despite the fact that manufacturers indicate the durability of bathroom curtain coverings, no physical effort is required during cleaning and washing. For the manual method, use foam sponges, brushes with soft bristles, cleaning products without abrasive materials. The maximum processing temperature is 40-60 degrees. Ironing 100% cotton curtains is acceptable.
Polyethylene
Cheap canvases are processed without leaving the bar. On the surface of the oilcloth, do not apply cleaning products with aggressive components: chlorine, oxalic acid. They wipe the curtain with a soapy sponge and pour it out of the shower. For white and rusty spots, a soda-vinegar solution is used. Water drops are washed off with a towel and left to dry.
Polyester
Curtains made of synthetic material do not crease, dry quickly, do not get wet and are easy to clean. It is better to wipe small stains on the curtains, without removing them from the brackets above the bathroom. Stubborn dirt can be washed off by hand.
Textile
Cotton bath curtains treated with a water repellent compound require regular care, washing and ironing. The textile combined with polyester is dried in a flattened form. The fabric is washed in an automatic machine, using the means specified by the manufacturer.
Polyvinyl chloride
Vinyl products can be washed both by hand and in an automatic machine. The surface of the curtains is resistant to any cleaning agent.
Glass or plastic
Rigid tempered glass screens are treated with special compounds, thanks to which stains do not remain on the surface. For the care of stationary curtains, you can use compositions containing abrasives, aggressive components.
Plastic curtains are made of polycarbonate, PVC, silicone. Over time, they can become cloudy, yellow and soapy, lime stains remain on them. The treatment uses materials and methods similar to soft whitening curtains. Do not use aggressive cleaning devices.
How to dry well
Curtains made of natural fabrics, vinyl are dried in a straightened form, preventing ultraviolet radiation. Under the rays of the sun, the coloring layer and the structure of the material are destroyed. Polyester, polyethylene are dried after removing moisture with towels hung in their place above the bathroom. When the surfaces are cleaned without removing them from the supports, it is necessary to wipe them and straighten them as much as possible.
Problem prevention
To avoid losing the decorative effect, bath curtains should be kept clean.
Soap splashes should be removed after each bath, without letting them dry. To do this, they are washed off with a stream of water from the shower, then the remaining drops are shaken off in the bath.
Once a month, the bathroom curtains are washed: in an automatic machine, manually or without removing them from the supports (if it is impossible to remove them or the contamination is insignificant).
The bottom of the textile curtains is weighted to maintain its shape. It is necessary to pay special attention to the floor of the curtains, where fungus and mold appear in a humid environment. Once a month, such curtains should be washed and ironed with a hot iron.
Airing the bathroom is a prerequisite for combating fungus on all types of curtains. To dry the room, you can open the door for a short time, turn on additional ventilation or heating devices.