Rules and methods for discreetly sewing a hole on a t-shirt

A hole that appears in a prominent place can spoil the appearance of clothes. It can spread and grow quickly if the item is made of thin cotton jersey. Many will find useful information on how to discreetly sew a hole in a t-shirt using the most effective methods and materials. This can be done with the help of well-chosen threads and needles, an iron or a special tape designed to glue damaged fabrics.

Coaching

Before you start sewing a hole in a T-shirt, there are a few important things to consider:

• the amount of damages;
• the degree of edge fraying;
• type of fabric.

The next step is to determine what types of yarn and needles are suitable for the job.

Ideally, use the same yarn color as the ripped shirt. In some cases, shiny threads will look spectacular, the shade of which is in harmony or contrast with the main color of the product. Sometimes it is advisable to use threads taken from pantyhose or nylon stockings. The thickness of the needle depends on the density of the fabric. The finest sewing needles are used for most T-shirts.In addition to threads and needles, you will need an iron and a needle threader.

Basic methods

There are a few simple steps you can follow to gently repair a torn T-shirt defect. It is necessary to deal with each of them in detail.

Invisible recovery

If the hole in the T-shirt is small, it can be darned discreetly. This reliable classic means will allow it not to grow in size.

It is undesirable to use single threads for this, since the fabric will tighten and the defect will become noticeable to others.

For elastic mending, you need a thin thread from old nylon pantyhose. If it is impossible to match it tone on tone with the T-shirt, you can use a neutral version. The needle should be fine, like for beading.

Look at Also

Popular brands of liquid glass for phone screens and coating features

It is necessary to perform several actions in the following order:

1. Cut unnecessary pantyhose into conveniently sized pieces.
2. Gently pull the thread and thread it through the needle using the needle threader.
3. Without tying a knot, start working from the front of the shirt.
4. Slowly carefully collect all the loops with a needle - take one from below and from above, then make a small stitch. Make sure the fabric does not pull together.
5. When the process is complete, remove the needle from the wrong side of the garment.
6. Sew two or three more stitches to secure the thread, then cut it.
7. Smooth the treated area of ​​​​the product fabric and iron it from the inside with an iron. Under the influence of high temperature, the nylon will melt and close the hole even more reliably.

Repair with a solderless iron

A small hole can be repaired without unnecessary punctures. In this case, you need a heated iron. The sequence of actions is as follows:

1. Lay the T-shirt out on a flat, smooth surface.
2. Cut two pieces of the same size from the "spider's web" tape specially designed for repairing clothes.
3. Cut the corners of the "cobweb" squares.
4. Place the two pieces together so that the shiny sides are up.
5. In this form, place them inside the T-shirt under the hole.
6. Connect the edges of the hole with your fingers.
7. Turn on the iron and set the heating temperature to medium.
8. Iron the product for thirty seconds.

With fabric adhesive tape

Step by step instructions:

1. Return the damaged product.
2. Join the edges of the hole.
3. Place fabric tape and non-woven fabric over it.
4. To keep anything from moving to the side, put a piece of white cloth over it and sprinkle with a spray bottle.
5. Hold the heated iron in place of the patch for ten seconds.
6. Remove the white fabric and turn the product on its right side.

How to Sew a Large Round Hole Neatly

Wide, round holes are more difficult to sew due to uneven edges and lack of clear outlines.In this case, you can use an elastic thread of the same color or transparent. Under the torn part of the product, you can put a special "mushroom" for mending or an ordinary light bulb.

Look at Also

15 better than home options for sealing windows for the winter so they don't blow

The action plan is as follows:

1. Carefully cut the remaining torn fibers from the edges of the hole.
2. Thread a suitable thread through the needle and, moving slowly, sew each loop with small, neat stitches.
3. At the end of the process, it is easy to remove the thread in the center - this will reduce the area to be sewn.
4. Tie the thread from the seam side and smooth the T-shirt.

This method is more suitable for products with large patterns or a fleecy surface.On plain clothes, the stitched fragment may be noticeable.

How to sew the longitudinal damage of the product correctly

If there is a longitudinal tear on the T-shirt, you can repair it using the following method:

1. Gently fold both edges of the damage towards the middle.
2. Sweep from the sewn side while guiding the needle forward.
3. Topstitching to reinforce the recovery line.

In which cases it is worth contacting specialists

If the t-shirt is made of a rare, expensive and difficult to sew fabric, it is recommended to contact a professional sewing workshop. Having familiarized themselves with the problem, specialists will easily find the best way. Professional help will also be needed if the hole in the product is large.

Additional tips and tricks

If the damage cannot be repaired on your own and you do not want to contact the workshop, it is advisable to use useful recommendations. A stylish t-shirt can be decorated with decorative elements - brooches, rhinestones, feathers, sequins or beads.

Another option is to use iron-on stickers, available at any sewing supply store.

This method allows you to perfectly hide the hole in the T-shirt and does not require any skills. After repairing the hole, attach the sticker following the instructions. All that is needed for this is an iron and gauze. The images on the iron-on stickers are resistant to hand and machine washing, as well as to external influences.