TOP 10 remedies to remove limestone from a shower head at home
Absolutely everyone in the house has a bathroom. Therefore, sooner or later the question arises how to effectively clean the shower head. Limestone is the most common problem faced by housewives. Next, we offer to consider effective cleaning methods, as well as preventive measures to keep the shower elements in the bathroom clean.
Causes of the appearance of limestone
From time to time it happens that the normal jets of water from the shower head gradually turn into a fine rain. Limestone is also visible on the element itself.
This situation is not uncommon and can easily be explained: tap water is not of good quality and the salts it contains sooner or later cause the watering can and the shower hose to clog.
Preparing the sprayer for washing
First you need to figure out what exactly is clogged from the inside, namely a watering can or a hose.
To check this, the hose is disconnected from the watering can and water passes through it.If the pressure remains low, then the problem is there.
In addition, you need to carry out an external inspection of the spray in the bathroom. As a rule, it is immediately visible which holes are clogged.
Basic techniques and tricks
To effectively clean the shower head from limescale, you need to use one of many techniques and tricks.
Household chemicals
Household chemicals are a win-win option in the fight against lime contamination. The following means are considered the most effective.
Duck in vinaigrette
The product is applied to contaminated places and wait 15 minutes. After the shower accessories are washed in lukewarm water.
When working with this product, be sure to use gloves.
eyelash bang
The product is applied directly to the contaminated areas. It is produced in aerosol form, which makes it suitable for cleaning hard-to-reach items.
Mister Muscle
Available in spray. The product not only removes limescale, but also eliminates microbes. The product should be sprayed on the contaminated areas and after 5 minutes wash and wipe the shower.
Sarma
Available in gel form. It tolerates limestone deposits well. The product is applied to contaminated areas and left for 15 minutes, after which it will be necessary to clean the watering can from frost and wipe it dry.
Anti limestone
The product is not suitable for all shower heads, as the parts must be boiled during use. The limescale remover is dissolved in a liquid, which is then boiled. After that, the metal components of the watering can are placed in water and continue to boil for 10-15 minutes.
Cleaning steps
Cleaning a shower head involves several steps.
How to disassemble
First, the shower head is removed by turning it counterclockwise. It can be done with a key.
Then the plug is removed in the middle of the mesh and inside there is a screw under it, which is unscrewed with a screwdriver. Then, carefully, so as not to spoil the rubber seal, remove the mesh.
Dip in a pool
For soaking, the parts are sent in a container with white vinegar or a special anti-plaque agent. The process will take about 5-6 hours.
Checking hard-to-reach places
If after soaking some parts of the watering need to be cleaned, this can be done with a wire brush.
How to properly rinse and wipe at home
Rinse the watering can with cold water, then dry it.
What to do if the watering can is fixed at a height
The watering can is packed in an airtight plastic bag filled with vinegar and secured with tape. In this form, the shower elements must remain in place for several hours, after which they are rinsed with clean water.
Folk remedies
Next, we propose to consider the most effective traditional methods of dealing with limescale.
The vinegar
The parts to be cleaned are placed in heated vinegar for 2-3 hours. Then the elements of the watering can are washed with water and wiped dry.
Lemon or citric acid
This method is identical to the previous one, only the parts should be left for 15-20 minutes, then rinsed and wiped dry.
baby soap
Baby soap is applied to the sponge and the contaminated areas are rubbed until they are cleaned.
Special solution of soda, ammonia and vinegar
To prepare a solution, 250 milliliters of vinegar, 3 tablespoons of soda and 450 milliliters of ammonia are diluted in 1 liter of liquid. The mixture is heated and the contaminated parts are soaked in it.
oxalic acid
The acid is diluted in a hot liquid in a ratio of 1:20. The composition is applied to the blooming areas for 3 hours. Also, contaminated places are rubbed with a brush, after which the solution is washed off.
Prophylaxis
For prevention purposes, it is recommended:
- After using the shower, wipe the parts dry.
- Clean the watering can at least once a month.
- Install a water filter, especially for those with overhead showers.