TOP 10 recipes for making buttery slimes at home
As soon as they don't call this toy: both chewing gum and sticky butter. The delicate buttery texture is loved by customers of all ages for its suppleness. And the constant kneading of the mass will be good gymnastics for children's fingers and protect adults from stress.
Description and characteristics of butter slime
Butter slime is a mass that wrinkles well, stretches, does not stick to the hands. Outwardly, slimes look like butter, which is why they have this name.
Interestingly, when spreading, the bator lies flat on the surface, but does not stick to the knife and the table.
The pleasure of using is not only in the appearance of the object, but also in the sensations. The toy is completely harmless, does not contain toxins. A smile is made of soft clay and scrap materials.
Basic recipes
There are many ways to make butter-like slime. The preparation method is based on substances that create a delicate texture, make it soft, supple, not sticking to surfaces.
modeling clay
To make a real butter, you have to take the dishes. The container should not be used for eating.For the modeling clay, soft, tender, prepare:
- a bottle of PVA glue;
- shower gel 30 grams;
- a pinch of baking soda;
- thickener - borax 10 ml.
First, glue and gel are mixed. So much dye is added to it to achieve the desired color scheme. It is necessary to mix to obtain a homogeneous and evenly colored mass. 250 ml of hot water is poured into another dish, adding a little soda to it.
A soda solution is poured into the first mixture, then sodium tetraborate. It is important to knead as deeply as possible to obtain a thick product. At the end, play plasticine. Take as much as the volume of additional ingredients in the bowl turned out. Knead so that the slime becomes soft and tender.
Clay
Batr is made from clay called Soft Clay. Take 1 pack of material and 500ml of PVA glue is needed. To dilute the glue, prepare hot water in 150 ml. Add 5 tablespoons of hand cream to it. After thorough mixing, they begin to gradually add a thickener - borax, until the mass looks like slime.
At the end, kneading is performed with hands. A clay briquette is placed on top and the procedure is continued. When the slime starts to separate easily from your hands, leaving no residue, it's ready.
No glue
Glue liquid is replaced with starch (6 tablespoons) and shampoo (4 tablespoons). They are combined and a spoonful of children's cosmetic oil is poured. If you get a runny texture, you need to add more ingredients. They stop when the structure of the product is thick. To thicken, it is advisable to add a little borax. The dye is chosen at will.
Light modeling clay
slime will be shinyif you do it from:
- aerial modeling clay;
- stationery glue with a volume of 100 ml;
- shampoo - 75 ml;
- baby oil.
A piece of plasticine is poured on it with glue, kneading is carried out. You definitely need hot water - 150 ml. After pouring thick shampoo and a small amount of tetraborate, the toy should thicken. And here it is not necessary to overdo it. After all, you need an oily, easily smudged structure. For elasticity and the need for oil, which is used to care for the child's skin.
shaving cream
A slime is pleasant to the touch when:
- mix glue (185 grams) with hand cream;
- pour the foam - 200 ml;
- thicken brown in small portions.
With increased adhesion of the product, a solution of 10 ml of soda is required. The toy will be elastic if you mix pieces of light plasticine into the mass.
Free of PVA, thickener, foam
A safe and quick recipe from improvised means is made with:
- starch - 120 grams;
- a small amount of body cream;
- dishwashing liquid - 2 tbsp;
- a teaspoon of toothpaste.
All components are combined taking half the rate of starch. It is added at the end. It takes a long time to knead until the mud starts to trail behind the walls.
Without sodium tetraborate
Caramel will turn out without a chemical thickener if you knead the ingredients for a long time:
- first, liquid soap and PVA glue, taken in equal quantities;
- some toothpaste for them;
- then a pinch of baking soda.
The thickened mass is spread on a board and crumpled with your hands until the "dough" stops sticking to your hands.
Foam, glue and thickener
Hand gum can be made from ingredients such as PVA glue and shaving foam. On a tube of glue you need a piece of foam with a volume of a chicken egg. Thicken the caramel with sodium tetraborate. Body lotion or oil gives elasticity to the mass. Crafting a toy takes 40-60 minutes. After all, it is necessary when adding each part of the mud to knead the material to achieve uniformity.
Soft clay slime
The base of the toy will be soft clay. Additions to this:
- PVA glue;
- shaving cream;
- starch or baby powder, talcum powder;
- thick shampoo, cream.
First, in a bowl, mix the liquid ingredients, the coloring. The clay line comes at the end. To thicken it is better to take borax. Cosmetic oil will add elasticity to the slime.
The simplest recipe
It is enough to make a slime bator from airy modeling clay and shower gel. After kneading part of the plasticine until they become soft, they begin to introduce liquid drop by drop. The slime is constantly crumpled on the board. The very tight structure is diluted with gel.
Home storage and use
When the product is ready, you must handle it correctly:
- keep the jar closed;
- place in the refrigerator;
- without exposing it to the sun.
We must try not to contaminate the product with our hands. When the mass begins to lose its elasticity, oils are added to it. The dryness will cause the slime to tear. Water will save the product. But you have to add it a little. Excess fluid is removed with table salt. Just throw a few grains on the slime. After a strong shaking, let the toy rest for 2-3 days.
Staining of the viscous mass is carried out with food dyes.Do not use chemicals.
You can play with slime by using it as a stress reliever. They carve from a mass of interesting animals, monsters. You can throw the toy against the wall. It bounces easily off any surface.
It is advisable to "draw" patterns on the surface. A useful toy for small children. This will help in the development of the muscles of the little fingers. This will allow the child to develop better.
Tetraborate toys - dangerous or not
The best thickener for butter sludge is sodium tetraborate, which is a compound of boron, minerals, and boric acid. The substance is even added to some foods, although this procedure is prohibited. In factory sludge, a thickener is needed. In a small amount, it does not have a harmful effect on the body.But if you swallow a piece of mud, irritation will appear in the gastrointestinal tract. People with allergies may get rashes after playing with butter slime.
Borax is used in many industries, but care must be taken when dealing with thickened mud.
At home, you should not use tetraborate or follow the rules for using the chemical. It is replaced with starch, dissolving it in water, combining it with glue, shampoo, shaving foam.
Tips & Tricks
Proper handling of the toy will increase its lifespan. No need to throw a drool in the sand, on the road, on the grass. It is forbidden to give the product to children under 3 years of age. If a slime is made with borax, it can cause poisoning.
To give slime a pleasant smell, spice powders are used. You can decorate the product with balls, beads, rhinestones.In doing so, they will shape the products.
When preparing a toy, it is best to do it in rubber gloves. After work and playing with slime, they always wash their hands with soap.
If the caramel is covered with mold, you need to get rid of it.
It is advisable not to use slime for a long time. As soon as it becomes very dirty or begins to crumble, it is better to prepare a new toy. For elasticity, it is worth feeding the mud with water, drop by drop daily. You have to remember to leave the toy alone for a while. So, after lying down in a cool, dark place, he will quickly return to his normal state.