How to properly transport the washing machine, transport tips

Almost every family has a washing machine for washing clothes. Sometimes people decide to move and face the problem of transporting home appliances. Therefore, it is necessary to determine in advance how to transport the washing machine and what needs to be done for this.

How to prepare

First you need to start preparing the washing machine for further transportation.

Cut

Experts recommend disconnecting the washing machine from all communications. Therefore, before starting transportation, the equipment is disconnected from power sources and disconnected from the sewage system. In addition, it is disconnected in advance from the water pipes, which are responsible for the outflow of water.

If you do not disconnect all communications in advance, when trying to transport the washing machine, you can damage the sewer or water pipes.

Water disposal

Another action performed in advance is to drain the remaining fluid from the system. Water often remains in the pump, pipes and pipes, which are responsible for the flow or discharge of water.

To clean the system, you will have to dispose of the drain filter and liquid residues yourself.

Fixing pipes, wires and hatch

Many people choose not to secure wires and hoses that may be attached to the washer. However, it is better to fix them in advance so that during transport they do not get snagged or tangled. They can be fixed with adhesive tape on one of the walls or removed completely.

Look at Also

How to choose a microwave oven for home, a rating of the best models

Glue sharp corners and parts

Any technique has sharp angles and the puck is no exception. The main danger of such corners is that they can be scratched and injured on the limbs. Therefore, for safety, it is best to carefully tape each sharp corner with a thick layer of tape.

Tank fixing

Before shipping, the drum must be securely fixed so that it is not accidentally damaged.

How to Install Shipping Bolts

Most often, special shipping bolts are used to secure the tanks of washing equipment. These are the most suitable fasteners recommended by the manufacturers. The use of these bolts is very simple. To secure the tank, simply insert each bolt through the drilled mounting holes in the back of the machine.

How to transport without shipping bolts

Sometimes people do not have transportation fasteners and they have to fix the drum with improvised means. First you need to unscrew the back panel of the structure and put things in the hole between the wall and the tank that can dampen vibrations. To do this, use unnecessary rags, foam rubber or small pieces of foam.

Pack

Before transport, the equipment must be packaged so as not to be damaged on the road. Various materials can be used in the packaging.

In the factory

The best option for packing equipment is considered to be the use of a factory box. In this case, it is enough simply to place the washing machine inside the packaging and to pack it carefully so that it does not hang down during transport. The box should be carefully wrapped with tape so that it does not open on the road due to possible jerks.

Textile

People who bought a typewriter more than five years ago rarely have boxes and therefore have to pack the equipment in another way. Often they use fabric materials, which are completely wrapped around the structure. The fabric is fixed with ordinary tape or duct tape.

Corrugated cardboard

You can use corrugated cardboard to wrap the washer before shipping. The side walls of the washing equipment, as well as its upper and lower parts, are sheathed with cardboard. Cardboard sheets are fastened together with metal staples or adhesive tape.

Look at Also

Instructions for installing a washing machine and dryer in a column

Stretch film

Many people think that stretch film is only used to wrap small items, but that is not the case. This material is also suitable for packaging washing machines.The film is carefully wrapped around the equipment to protect its surface from mechanical damage.

Transportation

There are several recommendations for transporting washing equipment.

Recommendations for the transport and loading of automatic machines

It is necessary to transport the washing machine to the vehicle carefully so as not to damage it. It is also necessary to carefully immerse the equipment. Experts advise to immerse it so that it is in an upright position.

Modes of transport

There are three modes of transport that you should familiarize yourself with in advance.

In natural position

People moving to a new apartment need to transport the equipment properly. It is recommended to immerse him in a natural position so that he stands on his feet. This will prevent damage to the side walls.

On the side wall

Sometimes people have to carry the washing machine not vertically, but sideways. This method has some drawbacks, including:

• the possibility of damaging the side wall of the washing machine;
• difficult movement of material lying on its side.

On the back wall

To prevent the washing machine from falling during transport, it is placed on the rear wall. However, before that, a piece of cloth is placed on the surface to prevent damage to the machine.

How to properly transport in a passenger car

When transported in a passenger car, the equipment is placed in the back seat, since there is more free space. Before transporting, secure it to the seat so that the washing machine does not accidentally fall. You can also support it with your hands for greater reliability.

What can a violation of the transport rules lead to?

If you transport the washing machine incorrectly, some problems may arise.

Broken power cord

Some people choose not to repair the power cable. This damages it and stops working over time. To avoid this, you need to attach the cord to the wall of the washing machine.

Look at Also

Recommendations for choosing the right electric kettle

Breakage of the plastic parts of the housing

The cases of modern models of washing equipment have plastic elements that break easily. They can break due to incorrect positioning of the machine in the vehicle or poor quality packaging of the structure.

Breakage of the cuff, breakage of the hatch mounts

It's no secret that before transportation you need to tightly close the hatch of the washer so that it does not hang down. Failure to do so can lead to serious problems. Very often the cuff breaks, which leads to poor fixing of the hatch.

Failure of tank dampers

The tank in which things are placed before washing should be securely fixed. If you do not secure it, it may break down during transport and you will have to hand in the equipment for repair.

Hoses and pipes can break

Branch pipes with hoses are fixed to the walls of the device so that they do not hang down during transport. Some people decide it's not necessary and let it go. Because of this, parts are torn and damaged.

Wet circuit and short circuit of electrical wiring and contacts

Sometimes people don't care about the high-quality packaging of equipment and transport it without packaging. This causes moisture to seep inside, onto the wiring.

Control panel toggle switch may break

There is a special toggle switch on the control panel, which is responsible for adjusting the operation of the device. If transported carelessly, it may break.

Drain pump failure

Each washing machine is equipped with a special drain pump that pumps out liquid waste. If it breaks down, you will have to seek help from specialists.

An unsecured powder cup can break

Compartments for placing powder and detergents should be sealed with tape so that they do not open. If this is not done, the bowl will break along the way.

Conclusion

Sometimes people have to carry home appliances. To do everything correctly, you need to understand the recommendations for transporting washing machines.